Since 2012, OSHA inspectors have visited PJ Trailers Manufacturing, Inc. in Texas 3 times.
The most recent inspection opened on Nov 24, 2015 after a complaint, in Sumner.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $42,000; today they stand at $14,000, 67% less.
The rule cited most here is 1910.252 (welding fire safety), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. PJ Trailers Manufacturing, Inc. averages $7,000 across 1 cited inspection.
1 inspection on this page followed a fatal incident.
PJ Trailers Manufacturing, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
391employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch PJ Trailers Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Sumner site logged 21 recordable injuries or illnesses among about 422 workers: 4.8 per 100 full-time workers, against a median of 5.2 for its industry. Those cases cost 50 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
PJ Trailers Manufacturing, Inc. Sumner
Sumner · 2022
422
21
1
4.8
5.2
Included with any plan: 1 more yearly log from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Jan 26, 2017, Sumner: Hospitalization · fractures · arm(s), unspecified
An employee unlatched a trailer ramp to let water drain from the trailer after washing it. When the employee attempted to put the ramp back into position to latch it back up, the ramp fell on the employee's arm and fractured it.
A crane operator in the stacking bay was attempting to lift a trailer using a 7.5 ton crane. The employee had his hand on the chain to keep the trailer hooked up in the correct location. When the slack on the chain came up, the employee pinched his left fingers between the chain and the trailer breaking the left index and middle fingers.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(iv) Authorization. Before cutting or welding is permitted, the area shall be inspected by the individual responsible for authorizing cutting and welding operations. He shall designate precautions to be followed in granting authorization to proceed preferably in the form of a written permit.
29 CFR 1910.252(a)(2)(xiii)(d)
(D) Advise all contractors about flammable materials or hazardous conditions of which they may not be aware.
(ii) If there is a defect or evidence of damage that might expose an employee to injury, the defective or damaged item shall be removed from service, and no employee may use it until repairs and tests necessary to render the equipment safe have been made.
Other truck trailer manufacturing employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.