Playtex Manufacturing, Inc.: OSHA inspections and violations
Sidney, Ohio · Sanitary Paper Product Manufacturing · NAICS 322291
2inspections
4citation items
$24,153current penalties
Dec 15, 2020last inspection
OSHA has inspected Playtex Manufacturing, Inc. 2 times in Ohio since 2015.
The latest one began on Dec 15, 2020 on a referral, in Sidney.
Those inspections ended with 4 citation items: 4 serious.
Penalties were first proposed at $34,653 and now stand at $24,153, 30% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 2 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Playtex Manufacturing, Inc. averages $12,076 (2 cited inspections).
Playtex Manufacturing, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
260employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Playtex Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.
OSHA records show Playtex Manufacturing, Inc. at 2 sites in 2 states. Together they've had 3 inspections and $32,220 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Dec 12, 2020: Employee fractures and lacerates fingers while restarting ma
At 9:00 a.m. on December 12, 2020, Employee #1, a 21-year-old male, was restarting Line #1 of the Saturation Machine after a routine cleanup shutdown. Employee #1 was assigned to "walk" the fibrous material along the rollers as the line was brought back to full production. During the process, a part of the loosely connected material began to fall to the floor. In an attempt to grab the falling material and direct it back to the rollers, Employee #1 inadvertently placed his left hand into the unguarded nip point between the incoming rollers, resulting in multiple fingers being caught and injured. The employee suffered fractures and lacerations on his left hand and was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Sidney site logged 4 recordable injuries or illnesses among about 110 workers: 3.3 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 42 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Edgewell Personal Care
Sidney · 2025
110
4
2
3.3
2.1
Playtex Manufacturing
Sidney · 2024
114
2
0
1.7
2.1
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Feb 3, 2021, Sidney: Hospitalization · fractures · leg(s), unspecified
An employee was moving skids using a pallet jack. The employee tripped over the pallet jack and fell to the floor. The employee sustained fractures to his left leg.
An employee was working at the saturation machine. While he was manipulating webbing material, the nip rollers caught his left hand, breaking three fingers and lacerating his skin.
On or about July 21, 2015, an employee suffered a left thumb amputation when her hand was pulled into a rotating part while unjamming an Elsner machine.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other sanitary paper product manufacturing employers in Ohio
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.