South Salt Lake, Utah · Commercial Printing (except Screen and Books) · NAICS 323111
OSHA inspectors have visited Post-Press Services LLC in Utah one time.
It opened on May 18, 2021 as a planned inspection, in South Salt Lake.
In all, OSHA issued 2 citation items: 2 serious.
The proposed penalties came to $2,250; today they stand at $1,125, 50% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Post-Press Services LLC averages $1,125 across 1 cited inspection.
Utah · latest 90 days of OSHA records
68employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Utah
Checking a subcontractor, a client or your own company? Watch Post-Press Services LLC and get notified the morning OSHA posts a new citation for it.
Watch this company2580 South 1100 West, South Salt Lake, UT 84119 · Commercial Printing (except Screen and Books) · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.147(c)(1) · Lockout/tagout |
Serious | $750 | $375 | Jun 16, 2021 | Final |
| Citation 1, item 2 29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts |
Serious | $1,500 | $750 | Jun 16, 2021 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.147(c)(1)
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.