Since 2019, OSHA inspectors have visited Potlatchdeltic Corporation in Arkansas 4 times.
The most recent inspection opened on Feb 25, 2026 on a referral, in Ola and is still open.
In all, OSHA issued 15 citation items: 9 serious and 6 other-than-serious.
The proposed penalties came to $73,039; today they stand at $52,510, 28% less.
The rule cited most here is 1910.147 (lockout/tagout), 8 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Potlatchdeltic Corporation averages $13,127 across 4 cited inspections.
Potlatchdeltic Corporation also files yearly injury logs with OSHA, summarized below.
It reported 7 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Arkansas · latest 90 days of OSHA records
17employers cited
Get notified the morning OSHA posts each new citation in Arkansas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Potlatchdeltic Corporation and get notified the morning OSHA posts a new citation for it.
Incident on Feb 11, 2020: Employee sustains internal injuries when crushed by machine
At 5:51 a.m. on February 11, 2020, an employee working as a machine feeder for a sawmill was reaching into a stick recovery machine. The employee was trying to clear an 8-foot by 3/4-inch by 1-1/2-inch stick that had jammed the machine. The employee became caught between the metal kicker and metal frame of the machine. The employee sustained internal injuries in his abdomen and was hospitalized, requiring surgical removal of his right kidney.
Incident on Jul 10, 2019: Employee amputates finger from planer machine
At approximately 8:00 p.m. on July 10, 2019, an employee was clearing an obstruction from one of the planer cutting heads. The employee started the planer machine after clearing an obstruction and noticed one of the cutting heads was not starting. Then the employee removed the guard and reached into the machine, without locking the machine out, and the employee's right hand was sucked up by the blower and cut by the planer's cutting head. The employee amputated part of the right index and middle finger. The employee was treated but was not hospitalized.
Incident on Jan 4, 2019: Employee fractures ankle while clearing jam from debarker
At 2:00 a.m. on January 4, 2019, an employee was clearing a jam from Debarker #1 when the kicker activated due to a photo eye being tripped and fractured his ankle. The employee was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Waldo site logged 2 recordable injuries or illnesses among about 146 workers: 1.1 per 100 full-time workers, against a median of 4.2 for its industry. Those cases cost 69 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
PotlatchDeltic-Waldo
Waldo · 2025
146
2
2
1.1
4.2
PotlatchDeltic Manufacturing LLC, Ola
Ola · 2025
160
5
1
3.6
4.2
Warren Mill Site
Warren · 2022
208
4
1
1.6
4.2
PotlatchDeltic-Waldo Mill
Waldo · 2021
198
0
0
0.0
2.1
PotlatchDeltic: WARREN
Warren · 2020
200
7
2
2.9
4.2
PotlatchDeltic
Ola · 2019
153
4
2
2.2
4.2
Included with any plan: 10 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 7 reports on file, the 6 most recent shown.
Nov 30, 2025, Waldo: Hospitalization · traumatic injuries or exposures unspecified · multiple body parts n.e.c.
An employee was returning from conducting hot checks at a kiln area. A forklift struck him from behind as he walked back to the office. The employee suffered injures to his shoulder blade, neck, and liver that required hospitalization.
Nov 27, 2024, Warren: Amputation · amputations, avulsions, enucleations unspecified · other finger(s) n.e.c.
An employee was troubleshooting the strapper platen in the planer mill to resolve a jam. His finger became pinched between the safety pin and the hydraulic motor as he was aligning the safety pin, and he sustained a partial amputation near the lower knuckle of the left middle finger.
On October 26, 2023, at 1:00 AM, an employee was unjamming a locked-out belt on a machine that sets up wooden boards. When the wood came out, it impacted his right hand, knocking it into a guard. The guard of the machine then amputated the middle finger at the middle knuckle.
Feb 11, 2020, Warren: Hospitalization · internal injuries to organs and blood vessels of the trunk · abdomen, except internal location of diseases or disorders
An employee was attempting to unjam a stick recovery machine when he was caught between the metal kicker and the metal frame. He was hospitalized with internal injuries in the abdominal area and kidney damage.
An employee was moving 20-hp electric motor weighing approximately 280 lbs. The employee was sliding the motor on the floor in the storage area using their foot and guiding it with their hands. The employee's finger was pinched between the shaft of the motor they were moving and a stationary motor resulting in an amputation of the left pinky finger.
Jan 15, 2019, Warren: Hospitalization · fractures · upper arm(s)
While clearing a jam in the head rig chipper an employee had to remove the chipper's lid. When lifting the lid, it was found that a pin which allows the lid to pivot, was not in place. This caused the bottom of the lid to rotate and roll over the bump stop. The lid then rolled over towards the employee, striking the employee in the left arm and the front of his hard hat. The employee sustained a broken left humerus.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(5)(ii)(b)
(B) Standardized. Lockout and tagout devices shall be standardized within the facility in at least one of the following criteria: Color; shape; or size; and additionally, in the case of tagout devices, print and format shall be standardized.
Alert subscribers get notified of each newly cited employer in Arkansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.