Potters Industries, LLC: OSHA inspections and violations
Apex, North Carolina · Glass Product Manufacturing Made of Purchased Glass · NAICS 327215
5inspections
7citation items
$14,337current penalties
Jul 8, 2024last inspection
OSHA has inspected Potters Industries, LLC 5 times in North Carolina since 1989.
The latest one began on Jul 8, 2024 on a referral, in Apex.
Those inspections ended with 7 citation items: 6 serious and 1 other-than-serious.
Penalties were first proposed at $19,753 and now stand at $14,337, 27% lower after settlements or reviews.
Electrical wiring methods comes up most often in these citations: 2 items under 1910.305.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Potters Industries, LLC averages $11,614 (1 cited inspection).
Potters Industries, LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
North Carolina · latest 90 days of OSHA records
234employers cited
Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.
OSHA records show Potters Industries, LLC at 2 sites in 2 states. Together they've had 6 inspections and $17,912 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on May 18, 1989: Employee's arm amputated when pinned in elevator belt
At approximately 7:00 a.m., on May 18, 1989, Employee #1 proceeded into the cull et pit, opened the door of the elevator and started replacing cups on the wet cu llet elevator belt. Thinking that the main breaker switch should be off, Employe e #1 left the pit and proceeded to motor control center panel, turned the switch off, and returned to the pit. As Employee #1 proceeded to start replacing the n ext cup, the elevator started moving. This pinned Employee #1's arm and shoulder in the elevator belt and pulley. As a result Employee #1 sustained severe lacer ations and amputation of the left arm above the elbow. Employee #1 was hospitali zed. Employee #1 failed to lockout and tag out motor control center panel when h e turned switch to the off position.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Apex site logged 0 recordable injuries or illnesses among about 39 workers: 0.0 per 100 full-time workers, against a median of 3.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Potters Industries
Apex · 2025
39
0
0
0.0
3.1
Apex site
Apex · 2016
32
1
0
2.6
3.1
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.