OSHA SearchOSHA records by employer

Precision Machine & Fab: OSHA inspections and violations

Baton Rouge, Louisiana · Machine Shops · NAICS 332710

1inspections
7citation items
$16,429current penalties
Feb 28, 2023last inspection

OSHA inspectors have visited Precision Machine & Fab in Louisiana one time.

It opened on Feb 28, 2023 as a planned inspection, in Baton Rouge.

In all, OSHA issued 7 citation items: 6 serious and 1 other-than-serious.

The penalties, $16,429 in total, stand where OSHA first set them.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Precision Machine & Fab averages $16,429 across 1 cited inspection.

Precision Machine & Fab: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Louisiana · latest 90 days of OSHA records

19employers cited

Get notified the morning OSHA posts each new citation in Louisiana: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Louisiana

Checking a subcontractor, a client or your own company? Watch Precision Machine & Fab and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346534605 OPENED FEB 28, 2023Closed

Planned · Complete · Safety · 23 employees at the site · Closed Jan 29, 2024

7978 South Choctaw Drive, Baton Rouge, LA 70815 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$6,250$6,250Jun 27, 2023Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0Jun 27, 2023Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0Jun 27, 2023Final
Citation 1, item 2
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$3,036$3,036Jun 27, 2023Final
Citation 1, item 3
29 CFR 1910.242(b) · Hand and power tools
Serious$3,572$3,572Jun 27, 2023Final
Citation 1, item 4
29 CFR 1910.253(b)(4)(iii) · Gas welding and cutting
Serious$2,678$2,678Jun 27, 2023Final
Citation 2, item 1
29 CFR 1904.33(a) · Retention and updating
Other-than-serious$893$893Jun 27, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.33 · Retention and updating

29 CFR 1904.33(a)

(a) Basic requirement. You must save the OSHA 300 Log, the privacy case list (if one exists), the annual summary, and the OSHA 301 Incident Report forms for five (5) years following the end of the calendar year that these records cover.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.253 · Gas welding and cutting

Other machine shops employers in Louisiana

Alert subscribers get notified of each newly cited employer in Louisiana the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.