OSHA SearchOSHA records by employer

Pristine Cast Stone Inc: OSHA inspections and violations

Rockwall, Texas · Other Concrete Product Manufacturing · NAICS 327390

1inspections
4citation items
$6,052current penalties
Jan 30, 2019last inspection

OSHA inspectors have visited Pristine Cast Stone Inc in Texas one time.

It opened on Jan 30, 2019 as a planned inspection, in Rockwall.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $10,087; today they stand at $6,052, 40% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Pristine Cast Stone Inc averages $6,052 across 1 cited inspection.

Pristine Cast Stone Inc: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites Pristine Cast Stone Inc again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343747010 OPENED JAN 30, 2019Closed

Planned · Partial · Health · 8 employees at the site · Closed Feb 25, 2019

900 Sids Road, Rockwall, TX 75032 · Other Concrete Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$2,415$1,449Feb 12, 2019Final
Citation 1, item 2
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$2,842$1,705Feb 12, 2019Final
Citation 1, item 3
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Serious$2,415$1,449Feb 12, 2019Final
Citation 1, item 4
29 CFR 1910.219(f)(1) · Belts, pulleys and power-transmission parts
 Serious$2,415$1,449Feb 12, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other other concrete product manufacturing employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.