OSHA has inspected Production Saw & Machine Co. 10 times in Michigan since 1997.
The latest one began on Jul 22, 2026 after a complaint, in Clarklake; the case is still open.
Those inspections ended with 41 citation items: 27 serious, 2 repeat and 12 other-than-serious.
Penalties were first proposed at $42,750 and now stand at $22,625, 47% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 8 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Production Saw & Machine Co. averages $3,220 (5 cited inspections).
Production Saw & Machine Co. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Michigan · latest 90 days of OSHA records
653employers cited
12 of them in the same industry
Get notified the morning OSHA posts each new citation in Michigan: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Production Saw & Machine Co. and get notified the morning OSHA posts a new citation for it.
Incident on Feb 21, 2022: Employee is struck by falling bar and fractures leg
At 2:45 a.m. on February 21, 2022, an employee was standing beyond the plane of a light curtain in an automation area to inspect the condition of material and associated loading equipment being loaded into a saw operation. The employee leaned forward placing his hands on an unsecured bar, weighing approximately 750-800 pounds, sitting at the edge of some feed rails at a material loading point, causing it to roll toward him and fall off the rails. The employee's lower right leg sustained a compound fracture, and he was hospitalized.
Incident on Jul 18, 2019: Employee amputates fingertip in the conveyor pinch point
At approximately 1:20 a.m. on July 18, 2019, an employee was attending to a machine operation involving parts being cycled through an auto gage conveyor operating in the I4 Machining Cell. A part stopped in a rail-type conveyor. The employee placed her right index finger into an approximate one-inch opening at the part location to push the part through. A lever inside the conveyor frame lifted to advance the part and sheared the tip of her finger off. The employee was treated but was not hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 408.11421(4)
Serious
$5,600
$2,800
Jan 24, 2020
Final
Citation 1, item 2a
29 CFR 408.10034(12)
Serious
$5,600
$2,800
Jan 24, 2020
Final
Citation 1, item 2b
29 CFR 408.11852(1)
Serious
$0
$0
Jan 24, 2020
Final
Citation 1, item 2c
29 CFR 408.11854(1)
Serious
$0
$0
Jan 24, 2020
Final
Inspection 343210316 OPENED SEP 25, 2018Closed
Referral · Partial · Safety · 190 employees at the site · Closed Jan 7, 2019
Incident on May 16, 2018: Employees pinches finger in band saw clamp and amputates fin
At 11:00 p.m. on May 16, 2018, an employee was removing some material from a rectangular bar stock that was in a horizontal band saw. The employee placed his fingers between the stock and clamp when the clamp closed, pinching the tip of two fingers on his left hand. The employee amputated the tip of his finger and was hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1a
29 CFR 408.12611
Serious
$4,900
$2,450
Nov 20, 2018
Final
Citation 1, item 1b
29 CFR 408.12646
Serious
$0
$0
Nov 20, 2018
Final
Inspection 339961245 OPENED SEP 15, 2014Closed
Referral · Partial · Safety · 101 employees at the site · Closed Nov 6, 2014
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Clarklake site logged 8 recordable injuries or illnesses among about 160 workers: 5.6 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 222 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Production Saw and Machine
Clarklake · 2025
160
8
8
5.6
2.7
Production Saw & Machine
Clarklake · 2022
129
15
10
11.0
2.7
Included with any plan: 2 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(i) A list of the hazardous chemicals known to be present using a product identifier that is referenced on the appropriate safety data sheet (the list may be compiled for the workplace as a whole or for individual work areas); and,
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
Alert subscribers get notified of each newly cited employer in Michigan the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.