Professional Fabrications, Inc.: OSHA inspections and violations
Denmark, Wisconsin · Sheet Metal Work Manufacturing · NAICS 332322
2inspections
12citation items
$22,444current penalties
Aug 26, 2026last inspection
Professional Fabrications, Inc. has 2 OSHA inspections on record in Wisconsin, the first in 2018.
OSHA's last visit started on Aug 26, 2026 after a complaint, in Denmark.
Across those inspections OSHA issued 12 citation items: 11 serious and 1 other-than-serious.
OSHA proposed $39,824 in penalties. After settlements and reviews the total is $22,444, down 44%.
Most often, OSHA cited 1910.147, lockout/tagout (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Professional Fabrications, Inc. averages $11,222 over 2 cited inspections in that time.
Professional Fabrications, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
223employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Professional Fabrications, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Apr 3, 2018: Employee's finger is amputated in brake press
At 9:45 a.m. on April 3, 2018, an employee was working for a manufacturer of sheet metal work. He was operating a 700-kilonewton (80-ton) Amada Model Number RG-80 hydraulic press brake. The press brake was actuated by a foot treadle. The bottom of the press moved up to bend the metal part against the top die. At the time of the incident, the press brake did not have physical guarding or presence sensing device(s) in place to prevent employee exposure to the point-of-operation. The employee was forming an arm support part. It required three bends that were completed over two steps, with one step repeated in the program. The jig that bent the part into a u-shape was not within the appropriate tolerances. Because of that, another step had been added to the program sequence. The additional step would dump the outside of the part to create the proper U-shape. The employee was running the parts on the press. When he came to the third step in the sequence, he attempted to dump the part twice. After the initial dump, the program started over to the first step in the sequence, which bent the outside tabs on the part. The employee was holding the part in between the tool and die sections, when the tool came up. It bent the part more than he expected. His fingers were pinched between the two sides of the part. He sustained an amputation to the middle finger of his right hand. He was not hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Denmark site logged 2 recordable injuries or illnesses among about 67 workers: 3.2 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Professional Fabrications
Denmark · 2025
67
2
0
3.2
3.6
ProFab
Denmark · 2017
50
5
1
10.2
3.6
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was forming parts with a press brake when his left hand slipped on a part. His left index finger was then pinched between the tool and the v-die, resulting in a fingertip amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)(i)
(i) Select, and have each affected employee use, the types of PPE that will protect the affected employee from the hazards identified in the hazard assessment;
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.