Punch Press Products, Inc. has 8 OSHA inspections on record in California, the first in 1994.
OSHA's last visit started on Oct 3, 2022 as part of a related case, in Vernon.
Across those inspections OSHA issued 31 citation items: 12 serious and 19 other-than-serious.
OSHA proposed $106,975 in penalties. After settlements and reviews the total is $49,390, down 54%.
Most often, OSHA cited 2340.23, (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Punch Press Products, Inc. averages $14,400 over 1 cited inspection in that time.
Inspection 310493549 OPENED NOV 14, 2008Closed
Accident · Partial · Safety · 20 employees at the site · Closed Oct 23, 2009
2035 East 51st Street, Vernon, CA 90058 · All Other Miscellaneous Fabricated Metal Product Manufacturing · OSHA's record · Phone and website on Google Maps
Incident on Nov 11, 2008: Employee's finger is amputated while operating crane
At approximately 6:20 a.m. on November 11, 2008, Employee #1, a set-up lead-man for a facility that operates punch-press machines, was operating an overhead tra veling crane to load material on one of the press machines. Employee #1 rigged a 3,000 lb. roll of steel with a chain sling through the eye of the roll in a sin gle basket loop. He then attached the sling to itself with a chain link hook, wh ich also attached to the crane hook. Employee #1 then activated the crane by usi ng a hand-held control unit with his right hand. As the roll of steel began to r ise, slack developed in the chain sling on the hook side of the sling. To preven t the chain from slipping out of the hook, Employee #1 grabbed the slack side of the sling at the hook with his left hand. As the crane continued to raise the r oll of steel, the slack in the chain sling quickly tightened, trapping Employee #1's left index finger between the chain link and the hook. His finger was crush ed, causing an open fracture. Employee #1 was taken to Stacy Medical Center, whe re he was hospitalized and underwent surgery that required the amputation of his left index finger to close the open wound. The incident investigation concluded that the roll of steel being lifted was not rigged properly to prevent slippage of the sling.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 1 29 CFR 4896 D |
Other-than-serious | $410 | $410 | Dec 10, 2008 | Closed |
| Citation 1, item 2 29 CFR 5021 A |
Other-than-serious | $410 | $410 | Dec 10, 2008 | Closed |
| Citation 1, item 3 29 CFR 5044 A |
Other-than-serious | $410 | $410 | Dec 10, 2008 | Closed |
| Citation 2, item 1 29 CFR 5042 A06 |
Serious | $14,400 | $3,710 | Dec 10, 2008 | Final |
Inspection 307161430 OPENED JUN 2, 2004Closed
Accident · Partial · Safety · 96 employees at the site · Closed Jun 5, 2007
1911 East 51st Street, Los Angeles, CA 90058 · Forging and Stamping · OSHA's record · Phone and website on Google Maps
Incident on May 22, 2004: Employee amputates finger in punch press machine
At approximately 6:00 a.m. on May 22, 2004, an employee was working by himself a nd had finished making metal parts at the friction welder machine. The employee was engaged in the procedure of set up changeover on the machine by taking out t he jaw mechanisms. He was removing the block jaw on the left side and proceeded to remove two bolts on the jaw on the right. When the employee pushed the two bu ttons to activate the hydraulic pistons of the jaws, he placed his left hand ins ide the working area. The employee's finger inadvertently got caught between the support base on the left jaw and the right jaw block. The employee sustained am putation of his left index finger. He was transported to Los Angeles County Gene ral Hospital and admitted the same day. He arrived in the hospital at 7:00 a.m. and left the hospital at 2:00 p.m. The Equipment used was a Friction Welder Mach ine, Number 104, Model Number TH-U-35HW, Welding Capacity 35, Spindle Drive 11 2 / 4, Manufacture Number 379052, Toho Control Systems Ltd, Jaw block 0.625 of an inch, Control Panel CARGAOOF, De Varilla Feeder, Traub Machine Number 228, Elec trical Control Panel, 480-volts, Exposed electrical openings.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 1 29 CFR 342 A |
Other-than-serious | $5,000 | $5,000 | Oct 29, 2004 | Final |
| Citation 1, item 2 |
Other-than-serious | $485 | $125 | Oct 29, 2004 | Final |
| Citation 1, item 3 |
Other-than-serious | $485 | $0 | Oct 29, 2004 | Final |
| Citation 1, item 5 29 CFR 3328 G |
Other-than-serious | $605 | $125 | Oct 29, 2004 | Final |
| Citation 1, item 6 29 CFR 3314 A |
Other-than-serious | $2,250 | $500 | Oct 29, 2004 | Final |
| Citation 2, item 1 |
Serious | $5,850 | $2,250 | Oct 29, 2004 | Final |
| Citation 3, item 1 29 CFR 4050 A |
Other-than-serious | $7,310 | $250 | Oct 29, 2004 | Final |
| Citation 4, item 1 29 CFR 4075 A |
Serious | $5,850 | $2,250 | Oct 29, 2004 | Final |
Incident on Feb 12, 1998: Employee injured when leg burned in soaking tank
At 11:09 a.m. on February 12, 1998, Employee #1 received chemical and thermal se cond-degree burns to his leg. Employee #1 was a plater who worked for Punch Pres s Products. At the time of the incident, Employee #1 was working at the plating line. A rack full of material had broken and had fallen into the Rokleen soak ta nk, which was heated to 180 degrees Fahrenheit and contained a caustic solution mixture. Employee #1 went to the tank, climbed up on the lip of the tank, and by use of a hook attempted to remove the rack and materials. While standing on the lip, Employee #1's foot slipped into the hot caustic mixture and burned his leg . The resultant injury was a third degree burn and required hospitalization for treatment with skin grafts.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 2 29 CFR 3203 A07 F |
Other-than-serious | $560 | $225 | Aug 11, 1998 | Final |
| Citation 2, item 1 29 CFR 3273 A |
Serious | $5,000 | $1,875 | Aug 11, 1998 | Final |
| Citation 4, item 1 29 CFR 3210 A |
Serious | $1,405 | $225 | Aug 11, 1998 | Final |
Incident on Apr 11, 1997: Employee's finger amputated in rollers of banding machine
Employee #1 had worked at a metal stamping facility for three years. He was work ing at step three of a four-step band production line when he noticed that a cow orker, who was working at step 1, was having difficulty with his band-forming ma chine, model 159, serial #1989. When Employee #1 went over and stood in front of the machine's rollers, he noticed a piece of sheet metal lodged between them, c ausing the line to jam. The machine had 10 rollers, spanning approximately 8 ft in length, and located 43 in. above the floor. The lodged piece of metal was in the eighth roller. Employee #1 set the rollers to what he believed was reverse m ode, and activated them. His glove became caught in the rollers, which were actu ally moving in a forward direction. His right hand was pulled in and he suffered a partial amputation of his index finger, to the distal phalanx. Employee #1 ha d not been trained in how to unjam the machine.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|
| Citation 1, item 1 29 CFR 3314 F |
Other-than-serious | $300 | $300 | Oct 10, 1997 | Closed |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.