OSHA SearchOSHA records by employer

Purestat Engineered Technologies, Inc.: OSHA inspections and violations

Lewiston, Maine · Plastics Packaging Film and Sheet (including Laminated) Manufacturing · NAICS 326112

1inspections
3citation items
$16,007current penalties
Feb 5, 2018last inspection

OSHA inspectors have visited Purestat Engineered Technologies, Inc. in Maine one time.

It opened on Feb 5, 2018 on a referral, in Lewiston.

In all, OSHA issued 3 citation items: 1 serious, 1 repeat and 1 other-than-serious.

The proposed penalties came to $28,456; today they stand at $16,007, 44% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Purestat Engineered Technologies, Inc. averages $16,007 across 1 cited inspection.

Purestat Engineered Technologies, Inc. also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Purestat Engineered Technologies, Inc.: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites Purestat Engineered Technologies, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342928017 OPENED FEB 5, 2018Closed

Referral · Partial · Safety · 34 employees at the site · Closed Feb 11, 2019

21 Old Farm Road, Lewiston, ME 04240 · Plastics Packaging Film and Sheet (including Laminated) Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Oct 9, 2017: Employee attempts to avoid jammed equipment and amputates fi

At 9:30 p.m. on October 9, 2017, an employee was involved in some bag manufacturing operations when he saw a bag fall into the bottom of the machine. The employee reached into the machine to grab the bag before it jammed the machine and caught his left index finger in the chain and sprocket, amputating his fingertip. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.219(h)(1) · Belts, pulleys and power-transmission parts
Serious$7,114$5,336Mar 20, 2018Final
Citation 2, item 1
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Repeat$14,228$7,114Mar 20, 2018Final
Citation 3, item 1
29 CFR 1904.39(a)(2) · Reporting deaths and severe injuries
Other-than-serious$7,114$3,557Mar 20, 2018Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2018, the Lewiston site logged 2 recordable injuries or illnesses among about 39 workers: 5.1 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 23 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Purestat Eng.
Lewiston · 2018
39 215.12.6

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Oct 9, 2017, Lewiston: Amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was working a bag machine when bags began falling into the machine and into the gears. While attempting to remove the bags, the employee's left index finger became jammed and amputated in a gear.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(2)

(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(f)(3)

(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.

29 CFR 1910.219(h)(1)

(h) Keys, setscrews, and other projections. (1) All projecting keys, setscrews, and other projections in revolving parts shall be removed or made flush or guarded by metal cover. This subparagraph does not apply to keys or setscrews within gear or sprocket casings or other enclosures, nor to keys, setscrews, or oilcups in hubs of pulleys less than twenty (20) inches in diameter where they are within the plane of the rim of the pulley.

Other plastics packaging film and sheet (including laminated) manufacturing employers in Maine

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.