Qesc, LLC has one OSHA inspection on record in Texas.
OSHA opened it on Oct 13, 2022 after a complaint, in Houston.
From that inspection OSHA issued 3 citation items: 3 serious.
OSHA proposed $11,095 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.215, grinders and abrasive wheels (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Qesc, LLC averages $11,095 over 1 cited inspection in that time.
Qesc, LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
393employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Houston site logged 1 recordable injury or illness among about 59 workers: 1.7 per 100 full-time workers, against a median of 5.4 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Qesc LLC
Houston · 2023
59
1
0
1.7
5.4
Qesc
Houston · 2018
105
3
2
2.4
5.4
Included with any plan: 1 more yearly log from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Other steel foundries (except investment) employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.