Quanex Building Products: OSHA inspections and violations
Rice Lake, Wisconsin · Custom Architectural Woodwork and Millwork Manufacturing · NAICS 337212
3inspections
5citation items
$12,600current penalties
Oct 2, 2015last inspection
Since 2014, OSHA inspectors have visited Quanex Building Products in Wisconsin 3 times.
The most recent inspection opened on Oct 2, 2015 on a referral, in Rice Lake.
In all, OSHA issued 5 citation items: 5 serious.
The proposed penalties came to $21,000; today they stand at $12,600, 40% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Quanex Building Products averages $4,200 across 1 cited inspection.
Quanex Building Products also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
228employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Rice Lake site logged 15 recordable injuries or illnesses among about 349 workers: 4.7 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 90 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Quanex Building Products
Rice Lake · 2020
349
15
6
4.7
3.6
Quanex Rice Lake
Rice Lake · 2018
311
9
3
3.0
3.6
Quanex Homeshield Rice Lake
Rice Lake · 2017
267
8
2
2.8
3.6
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was cutting material with a double miter saw. While attempting to clear a piece of material from under the machine's housing, her left hand contacted the saw blade, amputating her finger at the second knuckle.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(C) Where lockout is used for energy control, the periodic inspection shall include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected.
29 CFR 1910.147(c)(6)(ii)
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Other custom architectural woodwork and millwork manufacturing employers in Wisconsin
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.