OSHA SearchOSHA records by employer

Quickdrain USA: OSHA inspections and violations

Denver, Colorado · Plumbing Fixture Fitting and Trim Manufacturing · NAICS 332913

1inspections
3citation items
$12,565current penalties
Jun 25, 2018last inspection

OSHA has inspected Quickdrain USA once in Colorado.

The inspection began on Jun 25, 2018 on a referral, in Denver.

That inspection ended with 3 citation items: 2 serious and 1 other-than-serious.

Penalties were first proposed at $12,565 and still stand at $12,565.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Quickdrain USA averages $12,565 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Quickdrain USA: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Colorado · latest 90 days of OSHA records

136employers cited

Get notified the morning OSHA posts each new citation in Colorado: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Colorado

Checking a subcontractor, a client or your own company? Watch Quickdrain USA and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343283461 OPENED JUN 25, 2018Closed

Referral · Partial · Safety · 850 employees at the site · Closed Dec 19, 2018

2597 W. 64th Ave., Denver, CO 80221 · Plumbing Fixture Fitting and Trim Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Jun 14, 2018: Employee's fingertip is amputated by router

At 3:00 p.m. on June 14, 2018, an employee was cleaning debris from the top of a router table when one of his fingers contacted the machine blade. The incident investigation reported that the router had not been turned off before the employee clearing debris. The employee's fingertip was amputated, which he was hospitalized and received treatment.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1904.39(a)(2) · Reporting deaths and severe injuries
 Serious$4,712$4,712Nov 9, 2018Final
Citation 1, item 2
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$7,853$7,853Nov 9, 2018Final
Citation 2, item 1
29 CFR 1910.134(c)(2)(i) · Respiratory protection
 Other-than-serious$0$0Nov 9, 2018Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Jun 14, 2018, Denver: Amputation · amputations · fingertip(s)

An employee was cleaning off the cutting area around a router machine when the router bit partially amputated his fingertip. The router was running and guarded at the time of the incident.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(2)

(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(c)(2)(i)

(i) An employer may provide respirators at the request of employees or permit employees to use their own respirators, if the employer determines that such respirator use will not in itself create a hazard. If the employer determines that any voluntary respirator use is permissible, the employer shall provide the respirator users with the information contained in appendix D to this section (“Information for Employees Using Respirators When Not Required Under the Standard”); and

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

Other plumbing fixture fitting and trim manufacturing employers in Colorado

Alert subscribers get notified of each newly cited employer in Colorado the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.