OSHA SearchOSHA records by employer

Ralph W. Brett: OSHA inspections and violations

Benton, Tennessee · Plastics Material and Resin Manufacturing · NAICS 325211

1inspections
9citation items
$1,450current penalties
Feb 4, 2022last inspection

OSHA has inspected Ralph W. Brett once in Tennessee.

The inspection began on Feb 4, 2022 as a planned inspection, in Benton.

That inspection ended with 9 citation items: 7 serious and 2 other-than-serious.

Penalties were first proposed at $1,450 and still stand at $1,450.

Woodworking machinery comes up most often in these citations: 3 items under 1910.213.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Ralph W. Brett averages $1,450 (1 cited inspection).

Ralph W. Brett: OSHA citation items per year, 2022 to 2022
Citation items per year, by inspection date.

Tennessee · latest 90 days of OSHA records

344employers cited

Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Tennessee

Checking a subcontractor, a client or your own company? Watch Ralph W. Brett and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345780365 OPENED FEB 4, 2022Closed

Planned · Complete · Safety · 23 employees at the site · Closed Jun 6, 2022

2166 Parksville Road, Benton, TN 37307 · Plastics Material and Resin Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.29(b)(1) · Fall protection systems in general industry
Serious$350$350May 2, 2022Final
Citation 1, item 1b
29 CFR 1910.29(b)(2)(i) · Fall protection systems in general industry
Serious$0$0May 2, 2022Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$350$350May 2, 2022Final
Citation 1, item 3a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$400$400May 2, 2022Final
Citation 1, item 3b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0May 2, 2022Final
Citation 1, item 3c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0May 2, 2022Final
Citation 1, item 4
29 CFR 1910.253(b)(4)(i) · Gas welding and cutting
Serious$350$350May 2, 2022Final
Citation 2, item 1
29 CFR 1910.303(g)(1) · Electrical equipment, general requirements
Other-than-serious$0$0May 2, 2022Final
Citation 2, item 2
29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods
Other-than-serious$0$0May 2, 2022Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.29 · Fall protection systems in general industry

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.305 · Electrical wiring methods

Other plastics material and resin manufacturing employers in Tennessee

Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.