OSHA SearchOSHA records by employer

Rapid Displays, Inc.: OSHA inspections and violations

Chicago, Illinois · Sign Manufacturing · NAICS 339950

3inspections
4citation items
$17,282current penalties
Mar 27, 2019last inspection

Since 2012, OSHA inspectors have visited Rapid Displays, Inc. in Illinois 3 times.

The most recent inspection opened on Mar 27, 2019 on a referral, in Chicago.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $31,260; today they stand at $17,282, 45% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Rapid Displays, Inc. averages $9,282 across 1 cited inspection.

Rapid Displays, Inc. also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Rapid Displays, Inc.: OSHA citation items per year, 2012 to 2019
Citation items per year, by inspection date.

Illinois · latest 90 days of OSHA records

423employers cited

Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Illinois

Checking a subcontractor, a client or your own company? Watch Rapid Displays, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Rapid Displays, Inc. at 2 sites in 2 states. Together they've had 6 inspections and $18,767 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 343881025 OPENED MAR 27, 2019Closed

Referral · Partial · Safety · 279 employees at the site · Closed May 3, 2019

4300 W. 47th Street, Chicago, IL 60632 · Sign Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Mar 20, 2019: Employee amputates finger when struck by ripsaw blade

At 2:00 p.m. on March 20, 2019, an employee was using an unguarded Steel City Tool Works 10 inch Deluxe Saw, 4150 RPM, Model Number 35639, hand-fed table mounted circular ripsaw. The blade was up about 1.5 inches and the wood was 0.1875 inch thick. The employee's right hand index finger was amputated when it was struck by the saw blade. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$13,260$9,282Apr 4, 2019Final

Inspection 339559221 OPENED JAN 23, 2014Closed

Referral · Partial · Health · 275 employees at the site · Closed Feb 6, 2014

4300 W. 47th Street, Chicago, IL 60632 · Sign Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 335561643 OPENED AUG 1, 2012Closed

Complaint · Partial · Safety · 390 employees at the site · Closed Feb 7, 2013

4300 W. 47th Street, Chicago, IL 60632 · Commercial Printing (except Screen and Books) · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$6,000$4,000Oct 5, 2012Final
Citation 1, item 2a
29 CFR 1910.212(a)(1) · Machine guarding
Serious$6,000$4,000Oct 5, 2012Final
Citation 1, item 2b
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Serious$6,000$0Oct 5, 2012Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2020, the Chicago site logged 2 recordable injuries or illnesses among about 281 workers: 0.7 per 100 full-time workers, against a median of 2.5 for its industry. Those cases cost 17 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
RGL
Chicago · 2020
281 210.72.5
Corp
Chicago · 2020
281 732.62.5

Included with any plan: 5 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Mar 20, 2019, Chicago: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was using a table mounted circular ripsaw and amputated a finger. The saw was unguarded at the time.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other sign manufacturing employers in Illinois

Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.