Inspection 346709439 OPENED APR 5, 2023Closed
256 South 5500 West, Salt Lake City, UT 84104 · Furniture Stores · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
RC Willey has 3 OSHA inspections on record in Utah, the first in 2017.
OSHA's last visit started on Apr 5, 2023 after a complaint, in Salt Lake City.
Across those inspections OSHA issued 3 citation items: 3 serious.
OSHA proposed $5,000 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.213, woodworking machinery (3 items).
For context, across all retail employers the median penalty per cited inspection since 2015 is $1,750. RC Willey averages $5,000 over 1 cited inspection in that time.
Utah · latest 90 days of OSHA records
67employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Utah
- Hobby Lobby Stores IncSpanish Fork · cited Oct 1, 2026
- Quality Electrical Systems, Inc.Midvale · cited Sep 24, 2026
- Office DepotDraper · cited Sep 24, 2026
Checking a subcontractor, a client or your own company? Watch RC Willey and get notified the morning OSHA posts a new citation for it.
Watch this companyInspection history
Inspection 344289830 OPENED SEP 6, 2019Closed
2301 S 300 W, Salt Lake City, UT 84115 · Furniture Stores · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1910.213(c)(1) · Woodworking machinery |
Serious | $5,000 | $5,000 | Sep 30, 2019 | Final |
| Citation 1, item 1b 29 CFR 1910.213(c)(2) · Woodworking machinery |
Serious | $0 | $0 | Sep 30, 2019 | Final |
| Citation 1, item 1c 29 CFR 1910.213(c)(3) · Woodworking machinery |
Serious | $0 | $0 | Sep 30, 2019 | Final |
Inspection 342602760 OPENED AUG 31, 2017Closed
256 S 5500 W, Salt Lake City, UT 84104 · Furniture Merchant Wholesalers · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.213 · Woodworking machinery
29 CFR 1910.213(c)(1)
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.213(c)(2)
(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.
29 CFR 1910.213(c)(3)
(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.
Other furniture stores employers in Utah
- Wittwer Inc Hurricane · 6 citations · $3,500
- RC Willey Home Furnishings Salt Lake City · 1 citation · $3,150
- Osmond Designs Orem · 4 citations · $2,250
- Henriksen Butler Design Group LLC Saint George · 1 citation · $0
- Jattwa LLC Kaysville · 5 citations · $750
- Rocky Mountain Furniture Cedar City · 2 citations · $750
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.