OSHA SearchOSHA records by employer

RCF, Inc.: OSHA inspections and violations

Fillmore, Utah · Machine Shops · NAICS 332710

1inspections
3citation items
$750current penalties
Aug 12, 2019last inspection

OSHA inspectors have visited RCF, Inc. in Utah one time.

It opened on Aug 12, 2019 as a planned inspection, in Fillmore.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $1,500; today they stand at $750, 50% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. RCF, Inc. averages $750 across 1 cited inspection.

RCF, Inc.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites RCF, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344114871 OPENED AUG 12, 2019Closed

Planned · Partial · Safety · 4 employees at the site · Closed Sep 20, 2019

350 South Park Ave, Fillmore, UT 84631 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$1,500$750Aug 29, 2019Final
Citation 1, item 1b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
 Serious$0$0Aug 29, 2019Final
Citation 1, item 1c
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Serious$0$0Aug 29, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other machine shops employers in Utah

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.