OSHA SearchOSHA records by employer

Rdo Framing, LLC: OSHA inspections and violations

Turin, Georgia · Framing Contractors · NAICS 238130

2inspections
8citation items
$15,166current penalties
Oct 1, 2019last inspection

Since 2019, OSHA inspectors have visited Rdo Framing, LLC in Georgia 2 times.

The most recent inspection opened on Oct 1, 2019 as a planned inspection, in Peachtree City.

In all, OSHA issued 8 citation items: 6 serious and 2 repeat.

The proposed penalties came to $25,277; today they stand at $15,166, 40% less.

The rule cited most here is 1926.501 (fall protection in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Rdo Framing, LLC averages $7,583 across 2 cited inspections.

Rdo Framing, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

138employers cited

26 of them in the same industry

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Rdo Framing, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344348149 OPENED OCT 1, 2019Closed

Planned · Partial · Safety · 5 employees at the site · Closed Mar 18, 2021

Lot #2 Creekrise Drive, Peachtree City, GA 30269 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(d) · Woodworking tools
Serious$2,892$1,735Feb 20, 2020Final
Citation 2, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
Repeat$4,627$2,776Feb 20, 2020Final
Citation 2, item 2
29 CFR 1926.501(b)(13) · Fall protection in construction
Repeat$8,096$4,858Feb 20, 2020Final

Inspection 344155486 OPENED JUL 16, 2019Closed

Planned · Partial · Safety · 4 employees at the site · Closed Sep 25, 2019

256 Linch Road Lot 6 Graceton Farms, Turin, GA 30289 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
Serious$2,273$1,364Aug 14, 2019Final
Citation 1, item 2a
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
Serious$2,842$1,705Aug 14, 2019Final
Citation 1, item 2b
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
Serious$0$0Aug 14, 2019Final
Citation 1, item 3
29 CFR 1926.501(b)(13) · Fall protection in construction
Serious$2,842$1,705Aug 14, 2019Final
Citation 1, item 4
29 CFR 1926.1053(a)(1)(i) · Ladders in construction
Serious$1,705$1,023Aug 14, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(a)(1)(i)

(i) Each self-supporting portable ladder: At least four times the maximum intended load, except that each extra-heavy-duty type 1A metal or plastic ladder shall sustain at least 3.3 times the maximum intended load. The ability of a ladder to sustain the loads indicated in this paragraph shall be determined by applying or transmitting the requisite load to the ladder in a downward vertical direction. Ladders built and tested in conformance with the applicable provisions of appendix A of this subpart will be deemed to meet this requirement.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(d)

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.