OSHA SearchOSHA records by employer

Reactive Downhole Tools USA Inc.: OSHA inspections and violations

Humble, Texas · Fabricated Pipe and Pipe Fitting Manufacturing · NAICS 332996

1inspections
2citation items
$7,557current penalties
Apr 7, 2020last inspection

OSHA has inspected Reactive Downhole Tools USA Inc. once in Texas.

The inspection began on Apr 7, 2020 on a referral, in Humble.

That inspection ended with 2 citation items: 1 serious and 1 other-than-serious.

Penalties were first proposed at $10,796 and now stand at $7,557, 30% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Reactive Downhole Tools USA Inc. averages $7,557 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Reactive Downhole Tools USA Inc.: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

399employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Reactive Downhole Tools USA Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344719026 OPENED APR 7, 2020Closed

Referral · Partial · Safety · 32 employees at the site · Closed Nov 19, 2020

19945 Aldine Westfield Road, Humble, TX 77338 · Fabricated Pipe and Pipe Fitting Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Apr 6, 2020: Employee incurs multiple injuries when caught and pulled int

At 8:19 a.m. on April 6, 2020, an employee was working as a production operator for a firm that manufactured fabricated pipe and pipe fittings. He was operating an ACRA 36200SET precision gap bed manual engine lathe to trim rubber from a mandrel (pipe) reflex HP oil swell packer. The facility had two ACRA 36200SET manual lathes. The incident lathe had serial number 21367. Employees on two shifts operated the lathes. The pipe being machined in this incident was approximately 15 feet (4.6 meters) long, with an outside diameter (OD) of 6.625 in. (168.275 mm). The rubber was 48 in. (1.22 meters) long, with an OD of 7.5 +/- 0.5 in. (190.5 +/- 12.7 mm). The lathe was turning at approximately 230 rpm. To trim rubber from mandrels, employees mounted the mandrels (pipes) on the lathe and worked according to a written procedure approved in 2014. In one step, employees held a utility knife to trim rubber from the rotating pipe, with their hands within 1 to 2 in. (25 to 50 mm) of the rotating pipe. When blemishes were spotted, strips of sandpaper of different lengths were wrapped around the rotating pipe to smooth out the blemishes. In this incident, the employee was at the finishing stage of the process, cleaning the end of the rubber coating. He was pressing a strip of sandpaper against the mandrel as it rotated. He was caught and pulled in. The employee was carried around the pipe and thrown to the floor. He suffered a laceration to his head, a punctured liver, fractured ribs, and a fractured small finger. He was hospitalized. The lead production operator later said that the use of a utility knife and sandpaper was a common practice. He had trained employees to remove blemishes with strips of sandpaper. He had had a near miss while using sandpaper about a year earlier. He was wearing gloves and sanding with the pipe rotating toward him. The corrective action taken by management was for employees not to wear gloves and to ensure the pipe was rotating away from the operator.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$9,446$6,612May 21, 2020Final
Citation 2, item 1
29 CFR 1904.41(a)(2) · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
Other-than-serious$1,350$945May 21, 2020Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Apr 6, 2020, Humble: Hospitalization · cuts, lacerations · multiple body parts, unspecified

An employee had been cutting or measuring the coating on a 20-foot section of pipe. The employee was pulled into a rotating lathe and sustained lacerations to the face and upper body. The employee was hospitalized.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA

29 CFR 1904.41(a)(2)

(2) Annual electronic submission of information from OSHA Form 300 Log of Work-Related Injuries and Illnesses and OSHA Form 301 Injury and Illness Incident Report by establishments with 100 or more employees in designated industries. If your establishment had 100 or more employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix B to subpart E of this part, then you must electronically submit information from OSHA Forms 300 and 301 to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the forms.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

Other fabricated pipe and pipe fitting manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.