Coldwater, Michigan · Alumina Refining and Primary Aluminum Production · NAICS 331313
3inspections
5citation items
$5,750current penalties
Mar 10, 2025last inspection
Since 2024, OSHA inspectors have visited Real Alloy LLC in Michigan 3 times.
The most recent inspection opened on Mar 10, 2025 as part of a related case, in Coldwater.
In all, OSHA issued 5 citation items: 3 serious and 2 other-than-serious.
The proposed penalties came to $11,500; today they stand at $5,750, 50% less.
The rule cited most here is 1910.29 (fall protection systems in general industry), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Real Alloy LLC averages $1,917 across 3 cited inspections.
Real Alloy LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Michigan · latest 90 days of OSHA records
656employers cited
Get notified the morning OSHA posts each new citation in Michigan: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Coldwater site logged 2 recordable injuries or illnesses among about 51 workers: 3.5 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 77 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Real Alloy Recycling LLC. -Coldwater, MI
Coldwater · 2025
51
2
1
3.5
2.9
Real Alloy Specification LLC. -Coldwater, MI
Coldwater · 2022
75
0
0
0.0
2.9
Real Alloy Recycling, LLC
Coldwater · 2021
52
2
0
3.7
2.9
Real Alloy Specification, LLC.
Coldwater · 2018
98
4
1
3.4
2.9
Real Alloy Recycling, LLC.
Coldwater · 2018
64
0
0
0.0
2.9
Real Alloy Specification, Inc.
Coldwater · 2017
96
4
2
3.4
2.9
Real Alloy Recycling, Inc.
Coldwater · 2017
57
0
0
0.0
2.9
Included with any plan: 4 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(1) All places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition.
(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:
29 CFR 1910.29 · Fall protection systems in general industry
29 CFR 1910.29(b)(1)
(1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface. The top edge height may exceed 45 inches (114 cm), provided the guardrail system meets all other criteria of paragraph (b) of this section (see Figure D-11 of this section).
Other alumina refining and primary aluminum production employers in Michigan
Alert subscribers get notified of each newly cited employer in Michigan the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.