OSHA SearchOSHA records by employer

Rem Tech, Inc.: OSHA inspections and violations

Dalton Gardens, Idaho · Machine Shops · NAICS 332710

1inspections
5citation items
$5,819current penalties
Jun 23, 2026last inspection

OSHA has inspected Rem Tech, Inc. once in Idaho.

The inspection began on Jun 23, 2026 as a planned inspection, in Dalton Gardens.

That inspection ended with 5 citation items: 4 serious and 1 other-than-serious.

Penalties were first proposed at $8,313 and now stand at $5,819, 30% lower after settlements or reviews.

Grinders and abrasive wheels comes up most often in these citations: 2 items under 1910.215.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Rem Tech, Inc. averages $5,819 (1 cited inspection).

Rem Tech, Inc. also files yearly injury logs with OSHA, summarized below.

Rem Tech, Inc.: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Want to know if OSHA cites Rem Tech, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 349012641 OPENED JUN 23, 2026Closed

Planned · Partial · Safety · 25 employees at the site · Closed Aug 19, 2026

5872 North Government Way Building 2 Unit D, Dalton Gardens, ID 83815 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$2,894$2,026Aug 12, 2026Final
Citation 1, item 2a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
 Serious$3,405$2,384Aug 12, 2026Final
Citation 1, item 2b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
 Serious$0$0Aug 12, 2026Final
Citation 1, item 3
29 CFR 1910.242(b) · Hand and power tools
 Serious$1,447$1,013Aug 12, 2026Final
Citation 2, item 1
29 CFR 1904.41(a)(1)(i) · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
 Other-than-serious$567$397Aug 12, 2026Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Dalton Gardens site logged 0 recordable injuries or illnesses among about 25 workers: 0.0 per 100 full-time workers, against a median of 2.7 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
Rem-Tech inc.
Dalton Gardens · 2025
25 000.02.7

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA

29 CFR 1904.41(a)(1)(i)

(a) Basic requirements—(1) Annual electronic submission of information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses. (i) If your establishment had 20-249 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.242 · Hand and power tools

Other machine shops employers in Idaho

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.