Ithaca, New York · Analytical Laboratory Instrument Manufacturing · NAICS 334516
2inspections
5citation items
$4,350current penalties
May 9, 2022last inspection
Since 2010, OSHA inspectors have visited Rheonix, Inc in New York 2 times.
The most recent inspection opened on May 9, 2022 as a planned inspection, in Ithaca.
In all, OSHA issued 5 citation items: 4 serious and 1 other-than-serious.
The proposed penalties came to $9,794; today they stand at $4,350, 56% less.
The rule cited most here is 1910.212 (machine guarding), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Rheonix, Inc averages $3,350 across 1 cited inspection.
Rheonix, Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
353employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Ithaca site logged 1 recordable injury or illness among about 135 workers: 0.7 per 100 full-time workers, against a median of 1.1 for its industry. Those cases cost 40 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Rheonix, Inc.
Ithaca · 2021
135
1
1
0.7
1.1
Included with any plan: 2 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.1450 · Occupational exposure to hazardous chemicals in laboratories
29 CFR 1910.1450(e)(1)
(1) Where hazardous chemicals as defined by this standard are used in the workplace, the employer shall develop and carry out the provisions of a written Chemical Hygiene Plan which is:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.