OSHA SearchOSHA records by employer

RO-CA Custom Homes, LLC: OSHA inspections and violations

Springville, Utah · Framing Contractors · NAICS 238130

1inspections
3citation items
$750current penalties
Jul 1, 2020last inspection

OSHA inspectors have visited RO-CA Custom Homes, LLC in Utah one time.

It opened on Jul 1, 2020 as a planned inspection, in Springville.

In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

The proposed penalties came to $1,500; today they stand at $750, 50% less.

The rule cited most here is 1926.501 (fall protection in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. RO-CA Custom Homes, LLC averages $750 across 1 cited inspection.

RO-CA Custom Homes, LLC: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Utah · latest 90 days of OSHA records

70employers cited

Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Utah

Checking a subcontractor, a client or your own company? Watch RO-CA Custom Homes, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344816798 OPENED JUL 1, 2020Closed

Planned · Partial · Safety · 10 employees at the site · Closed Aug 13, 2020

1148 S 1200 W, Springville, UT 84663 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.501(b)(14) · Fall protection in construction
Serious$1,500$750Jul 21, 2020Final
Citation 1, item 1b
29 CFR 1926.501(b)(15) · Fall protection in construction
Serious$0$0Jul 21, 2020Final
Citation 2, item 1
29 CFR 1926.503(b)(1) · Fall protection training in construction
Other-than-serious$0$0Jul 21, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(14)

(14) Wall openings. Each employee working on, at, above, or near wall openings (including those with chutes attached) where the outside bottom edge of the wall opening is 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 m) above the walking/working surface, shall be protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system.

29 CFR 1926.501(b)(15)

(15) Walking/working surfaces not otherwise addressed. Except as provided in § 1926.500(a)(2) or in § 1926.501 (b)(1) through (b)(14), each employee on a walking/working surface 6 feet (1.8 m) or more above lower levels shall be protected from falling by a guardrail system, safety net system, or personal fall arrest system.

29 CFR 1926.503 · Fall protection training in construction

29 CFR 1926.503(b)(1)

(b) Certification of training. (1) The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.

Other framing contractors employers in Utah

Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.