OSHA SearchOSHA records by employer

Roberto G. Amaya: OSHA inspections and violations

High Point, North Carolina · Masonry Contractors · NAICS 238140

1inspections
3citation items
$2,100current penalties
Apr 30, 2019last inspection

OSHA inspectors have visited Roberto G. Amaya in North Carolina one time.

It opened on Apr 30, 2019 as part of a related case, in High Point.

In all, OSHA issued 3 citation items: 3 serious.

The penalties, $2,100 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Roberto G. Amaya averages $2,100 across 1 cited inspection.

Roberto G. Amaya: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

236employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch Roberto G. Amaya and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343973681 OPENED APR 30, 2019Closed

Unprogrammed related · Complete · Health · 4 employees at the site · Closed Mar 29, 2023

9622 Us Highway 311, High Point, NC 27263 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.451(e)(8) · Scaffolds, general requirements
Serious$2,100$2,100Jul 19, 2019Final
Citation 1, item 1b
29 CFR 1926.451(g)(1)(vi) · Scaffolds, general requirements
Serious$0$0Jul 19, 2019Final
Citation 1, item 1c
29 CFR 1926.451(g)(4)(ii) · Scaffolds, general requirements
Serious$0$0Jul 19, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(e)(8)

(8) Direct access to or from another surface shall be used only when the scaffold is not more than 14 inches (36 cm) horizontally and not more than 24 inches (61 cm) vertically from the other surface.

29 CFR 1926.451(g)(1)(vi)

(vi) Each employee performing overhand bricklaying operations from a supported scaffold shall be protected from falling from all open sides and ends of the scaffold (except at the side next to the wall being laid) by the use of a personal fall arrest system or guardrail system (with minimum 200 pound toprail capacity).

29 CFR 1926.451(g)(4)(ii)

(ii) The top edge height of toprails or equivalent member on supported scaffolds manufactured or placed in service after January 1, 2000 shall be installed between 38 inches (0.97 m) and 45 inches (1.2 m) above the platform surface. The top edge height on supported scaffolds manufactured and placed in service before January 1, 2000, and on all suspended scaffolds where both a guardrail and a personal fall arrest system are required shall be between 36 inches (0.9 m) and 45 inches (1.2 m). When conditions warrant, the height of the top edge may exceed the 45-inch height, provided the guardrail system meets all other criteria of paragraph (g)(4).

Other masonry contractors employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.