OSHA SearchOSHA records by employer

Rock Spring Contracting LLC: OSHA inspections and violations

District Heights, Maryland · Framing Contractors · NAICS 238130

2inspections
6citation items
$3,750current penalties
Sep 12, 2024last inspection

Rock Spring Contracting LLC has 2 OSHA inspections on record in Maryland, the first in 2024.

OSHA's last visit started on Sep 12, 2024 as a planned inspection, in Laurel.

Across those inspections OSHA issued 6 citation items: 3 serious and 3 other-than-serious.

OSHA proposed $3,750 in penalties and the amount has not been reduced.

Most often, OSHA cited 1910.213, woodworking machinery (3 items).

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Rock Spring Contracting LLC averages $1,875 over 2 cited inspections in that time.

Rock Spring Contracting LLC: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

Maryland · latest 90 days of OSHA records

197employers cited

21 of them in the same industry

Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Maryland

Checking a subcontractor, a client or your own company? Watch Rock Spring Contracting LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347752404 OPENED SEP 12, 2024Closed

Planned · Complete · Safety · 27 employees at the site · Closed Jan 14, 2025

7600 Montpelier Road, Laurel, MD 20723 · Drywall and Insulation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.405(g)(1)(iii) · Job-site wiring
 Other-than-serious$0$0Oct 23, 2024Final
Citation 1, item 2
29 CFR 1926.403(b)(2) · Electrical equipment on job sites
 Other-than-serious$0$0Oct 23, 2024Final
Citation 1, item 3
29 CFR 1926.416(e)(1) · Electrical safety in construction
 Other-than-serious$0$0Oct 23, 2024Final

Inspection 347238560 OPENED JAN 26, 2024Open

Accident · Partial · Safety · 7 employees at the site · Open

8701 D'arcy Road, District Heights, MD 20747 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$3,750$3,750Apr 10, 2024Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
 Serious$0$0Apr 10, 2024Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Apr 10, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

29 CFR 1926.403 · Electrical equipment on job sites

29 CFR 1926.405 · Job-site wiring

29 CFR 1926.416 · Electrical safety in construction

Other framing contractors employers in Maryland

Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.