OSHA SearchOSHA records by employer

Roger Stansbury: OSHA inspections and violations

Baltimore, Maryland · Roofing Contractors · NAICS 238160

1inspections
4citation items
$2,100current penalties
Mar 3, 2021last inspection

OSHA has inspected Roger Stansbury once in Maryland.

The inspection began on Mar 3, 2021 as a planned inspection, in Baltimore.

That inspection ended with 4 citation items: 3 serious and 1 other-than-serious.

Penalties were first proposed at $2,100 and still stand at $2,100.

Ladders in construction comes up most often in these citations: 2 items under 1926.1053.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Roger Stansbury averages $2,100 (1 cited inspection).

Roger Stansbury: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

Maryland · latest 90 days of OSHA records

194employers cited

36 of them in the same industry

Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Maryland

Checking a subcontractor, a client or your own company? Watch Roger Stansbury and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345175285 OPENED MAR 3, 2021Closed

Planned · Complete · Safety · 2 employees at the site · Closed Oct 14, 2021

7688 Canton Center Drive, Baltimore, MD 21224 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(10) · Fall protection in construction
Serious$1,050$1,050Apr 29, 2021Final
Citation 1, item 2a
29 CFR 1926.1053(b)(15) · Ladders in construction
Serious$1,050$1,050Apr 29, 2021Final
Citation 1, item 2b
29 CFR 1926.1053(b)(16) · Ladders in construction
Serious$0$0Apr 29, 2021Final
Citation 2, item 1
29 CFR 1926.503(b)(1) · Fall protection training in construction
Other-than-serious$0$0Apr 29, 2021Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(15)

(15) Ladders shall be inspected by a competent person for visible defects on a periodic basis and after any occurrence that could affect their safe use.

29 CFR 1926.1053(b)(16)

(16) Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, shall either be immediately marked in a manner that readily identifies them as defective, or be tagged with “Do Not Use” or similar language, and shall be withdrawn from service until repaired.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(10)

(10) Roofing work on Low-slope roofs. Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.

29 CFR 1926.503 · Fall protection training in construction

Other roofing contractors employers in Maryland

Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.