Rolite Manufacturing, Inc.: OSHA inspections and violations
Lancaster, New York · Metal Crown, Closure, and Other Metal Stamping (except Automotive) · NAICS 332119
2inspections
4citation items
$15,000current penalties
Jul 17, 2019last inspection
OSHA has inspected Rolite Manufacturing, Inc. 2 times in New York since 2019.
The latest one began on Jul 17, 2019 on a referral, in Lancaster.
Those inspections ended with 4 citation items: 3 serious and 1 other-than-serious.
Penalties were first proposed at $24,890 and now stand at $15,000, 40% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 2 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Rolite Manufacturing, Inc. averages $15,000 (1 cited inspection).
Rolite Manufacturing, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
353employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Rolite Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Jul 1, 2019: Employee lacerates thumb while cutting steel with pliers
At approximately 8:45 a.m. on July 1, 2019, an employee was starting a newly loaded coil on a machine. The employee noticed the extrusion was split and slipped his hand while adjusting with pliers, causing a laceration on the right thumb. The employee was treated but was not hospitalized.
No citations from this inspection.
Inspection 343998688 OPENED MAY 8, 2019Closed
Referral · Partial · Safety · 48 employees at the site · Closed Aug 14, 2020
Incident on Apr 24, 2019: Employee caught finger in machine ram, amputates fingertip
At 11:00 a.m. on April 24, 2019, an employee was adjusting the air pressure on a reamer machine when he caught his right pinky finger in between the ram and a stationary part of the machine. He amputated his fingertip and required medical treatment. The employee was not hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Lancaster site logged 0 recordable injuries or illnesses among about 40 workers: 0.0 per 100 full-time workers, against a median of 4.0 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Rolite Manufacturing Inc.
Lancaster · 2017
40
0
0
0.0
4.0
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(6)(ii)
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.