Salem Millwork, Inc. has one OSHA inspection on record in Pennsylvania.
OSHA opened it on Aug 28, 2026 on a referral, in Delmont, and the case has not closed yet.
From that inspection OSHA issued 3 citation items: 3 serious.
OSHA proposed $11,585 in penalties. After settlements and reviews the total is $8,200, down 29%.
Most often, OSHA cited 1910.213, woodworking machinery (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Salem Millwork, Inc. averages $8,200 over 1 cited inspection in that time.
Salem Millwork, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
297employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Delmont site logged 1 recordable injury or illness among about 40 workers: 2.8 per 100 full-time workers, against a median of 4.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Salem Millwork Inc
Delmont · 2025
40
1
0
2.8
4.6
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.213(c)(3)
(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.
29 CFR 1910.213(e)(2)
(2) Each circular resaw (other than self-feed saws with a roller or wheel at back of the saw) shall be provided with a spreader fastened securely behind the saw. The spreader shall be slightly thinner than the saw kerf and slightly thicker than the saw disk.
Other other millwork (including flooring) employers in Pennsylvania
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.