OSHA SearchOSHA records by employer

Santana Construction: OSHA inspections and violations

Jersey City, New Jersey · Commercial and Institutional Building Construction · NAICS 236220

1inspections
3citation items
$12,443current penalties
Dec 9, 2024last inspection

OSHA inspectors have visited Santana Construction in New Jersey one time.

It opened on Dec 9, 2024 as a planned inspection, in Jersey City and is still open.

In all, OSHA issued 3 citation items: 3 serious.

The penalties, $12,443 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Santana Construction averages $12,443 across 1 cited inspection.

Santana Construction: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

New Jersey · latest 90 days of OSHA records

272employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Jersey

Checking a subcontractor, a client or your own company? Watch Santana Construction and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347922411 OPENED DEC 9, 2024Open

Planned · Partial · Safety · 3 employees at the site · Open

76 Audrey Zapp Dr, Jersey City, NJ 07305 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(b)(1)(ii) · Scaffolds, general requirements
Serious$4,839$4,839Dec 18, 2024Final
Citation 1, item 2
29 CFR 1926.451(e)(1) · Scaffolds, general requirements
Serious$2,765$2,765Dec 18, 2024Final
Citation 1, item 3
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
Serious$4,839$4,839Dec 18, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(1)(ii)

(ii) Where the employer makes the demonstration provided for in paragraph (b)(1)(i) of this section, the platform shall be planked or decked as fully as possible and the remaining open space between the platform and the uprights shall not exceed 9 1/2 inches (24.1 cm).

29 CFR 1926.451(e)(1)

(1) When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface shall be used. Crossbraces shall not be used as a means of access.

29 CFR 1926.451(g)(1)

(g) Fall protection. (1) Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1) (i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.

Other commercial and institutional building construction employers in New Jersey

Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.