Scandia Plastics, LLC: OSHA inspections and violations
Sheboygan, Wisconsin · All Other Plastics Product Manufacturing · NAICS 326199
4inspections
6citation items
$6,600current penalties
Jun 22, 2020last inspection
Scandia Plastics, LLC has 4 OSHA inspections on record in Wisconsin, the first in 1986.
OSHA's last visit started on Jun 22, 2020 on a referral, in Sheboygan.
Across those inspections OSHA issued 6 citation items: 5 serious and 1 other-than-serious.
OSHA proposed $6,810 in penalties. After settlements and reviews the total is $6,600, down 3%.
Most often, OSHA cited 1910.147, lockout/tagout (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Scandia Plastics, LLC averages $5,735 over 1 cited inspection in that time.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
OSHA records show Scandia Plastics, LLC at 2 sites in 2 states. Together they've had 10 inspections and $24,166 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jun 12, 2020: Employee partially amputates fingertip while troubleshooting
At 12:45 p.m. on June 12, 2020, an employee was troubleshooting the Automa Plus AT5D Blow Mold Press #11 De-flash section to determine why moiles (plastic scrap) was not being blown clear of the De-flash section. The employee did not hear the air noise indicating the cooling air nozzle was blowing. The employee attempted to feel the air flow while the control panel indicated the cooling air nozzle should be operating. The portion of the De-flash section that cut off the moiles of the plastic containers closed while the employee had his hand in the De-flash section. The employee suffered a partial fingertip amputation of the left middle finger and was treated without hospitalization.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jun 12, 2020, Sheboygan: Amputation · amputations · fingertip(s)
An employee was troubleshooting a press. The employee had used a ladder to reach a portion of the press when the press activated and caused a partial amputation to his left middle fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.147(c)(6)(ii)
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.