Schoitz Engineering Inc: OSHA inspections and violations
Waterloo, Iowa · Special Die and Tool, Die Set, Jig, and Fixture Manufacturing · NAICS 333514
3inspections
5citation items
$7,022current penalties
Dec 8, 2021last inspection
Since 1985, OSHA inspectors have visited Schoitz Engineering Inc in Iowa 3 times.
The most recent inspection opened on Dec 8, 2021 as a planned inspection, in Waterloo.
In all, OSHA issued 5 citation items: 2 serious and 3 other-than-serious.
The proposed penalties came to $14,044; today they stand at $7,022, 50% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Schoitz Engineering Inc averages $7,022 across 1 cited inspection.
Schoitz Engineering Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
64employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Waterloo site logged 0 recordable injuries or illnesses among about 29 workers: 0.0 per 100 full-time workers, against a median of 2.3 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Schoitz Engineering Inc.
Waterloo · 2025
29
0
0
0.0
2.3
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(3) Vertical portable grinders. Safety guards used on machines known as right angle head or vertical portable grinders shall have a maximum exposure angle of 180°, and the guard shall be so located so as to be between the operator and the wheel during use. Adjustment of guard shall be such that pieces of an accidentally broken wheel will be deflected away from the operator. (See Figure P-4.)
Other special die and tool, die set, jig, and fixture manufacturing employers in Iowa
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.