Since 2006, OSHA inspectors have visited Seaboard Foods LLC in Montana 2 times.
The most recent inspection opened on Dec 11, 2018 on a referral, in Missoula.
In all, OSHA issued 5 citation items: 4 serious and 1 other-than-serious.
The proposed penalties came to $14,100; today they stand at $7,050, 50% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Seaboard Foods LLC averages $4,262 across 1 cited inspection.
Seaboard Foods LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Montana · latest 90 days of OSHA records
27employers cited
Get notified the morning OSHA posts each new citation in Montana: the employer, the site address, the rules broken and the penalty.
OSHA records show Seaboard Foods LLC at 5 sites in 3 states. Together they've had 29 inspections and $231,615 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 5 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Missoula site logged 15 recordable injuries or illnesses among about 135 workers: 10.7 per 100 full-time workers, against a median of 3.7 for its industry. Those cases cost 15 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Daily's Premium Meats
Missoula · 2018
135
15
5
10.7
3.7
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(h)(1)
(h) Keys, setscrews, and other projections. (1) All projecting keys, setscrews, and other projections in revolving parts shall be removed or made flush or guarded by metal cover. This subparagraph does not apply to keys or setscrews within gear or sprocket casings or other enclosures, nor to keys, setscrews, or oilcups in hubs of pulleys less than twenty (20) inches in diameter where they are within the plane of the rim of the pulley.
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Montana the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.