OSHA SearchOSHA records by employer

Seaton Corporation: OSHA inspections and violations

Homerville, Georgia · Temporary Help Services · NAICS 561320

1inspections
3citation items
$13,750current penalties
Mar 30, 2015last inspection

OSHA inspectors have visited Seaton Corporation in Georgia one time.

It opened on Mar 30, 2015 on a referral, in Homerville.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $19,000; today they stand at $13,750, 28% less.

The rule cited most here is 1910.217 (mechanical power presses), 2 times.

Among staffing, cleaning and waste services employers, the typical cited inspection since 2015 ends with a $2,208 penalty. Seaton Corporation averages $13,750 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Seaton Corporation: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

145employers cited

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Seaton Corporation and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340513753 OPENED MAR 30, 2015Closed

Referral · Partial · Safety · 88 employees at the site · Closed Oct 27, 2016

1601 Valdosta Highway, Homerville, GA 31634 · Temporary Help Services · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.217(c)(1)(i) · Mechanical power presses
Serious$7,000$5,500Sep 24, 2015Final
Citation 1, item 2
29 CFR 1910.217(f)(2) · Mechanical power presses
Serious$7,000$4,250Sep 24, 2015Final
Citation 1, item 3
29 CFR 1910.219(c)(2)(i) · Belts, pulleys and power-transmission parts
Serious$5,000$4,000Sep 24, 2015Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Mar 25, 2015, Homerville: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee operating a metal press moved her left hand into the area of operation. The press cycled, injuring her third finger and partially amputating her fourth finger. The employee required surgery.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.217 · Mechanical power presses

29 CFR 1910.217(c)(1)(i)

(c) Safeguarding the point of operation—(1) General requirements. (i) It shall be the responsibility of the employer to provide and insure the usage of “point of operation guards” or properly applied and adjusted point of operation devices on every operation performed on a mechanical power press. See Table O-10.

29 CFR 1910.217(f)(2)

(2) Instruction to operators. The employer shall train and instruct the operator in the safe method of work before starting work on any operation covered by this section. The employer shall insure by adequate supervision that correct operating procedures are being followed.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(c)(2)(i)

(2) Guarding horizontal shafting. (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.

Other temporary help services employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.