Spring Hill, Kansas · Motor Vehicle Seating and Interior Trim Manufacturing · NAICS 336360
3inspections
4citation items
$121,544current penalties
Aug 15, 2024last inspection
Seats, Inc. has 3 OSHA inspections on record in Kansas, the first in 2021.
OSHA's last visit started on Aug 15, 2024 on a referral, in Spring Hill.
Across those inspections OSHA issued 4 citation items: 2 serious and 2 repeat.
OSHA proposed $206,889 in penalties. After settlements and reviews the total is $121,544, down 41%.
Most often, OSHA cited 1910.212, machine guarding (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Seats, Inc. averages $40,515 over 3 cited inspections in that time.
Seats, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
43employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
OSHA records show Seats, Inc. at 3 sites in 2 states. Together they've had 17 inspections and $144,471 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Spring Hill site logged 2 recordable injuries or illnesses among about 138 workers: 1.4 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 87 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Seats Incorporated Spring Hill Kansas
Spring Hill · 2025
138
2
1
1.4
2.7
Included with any plan: 2 more yearly logs from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Aug 8, 2024, Spring Hill: Hospitalization, amputation · amputations involving bone loss · thumb(s)
An employee was working on a seat assembly line at the rods and dials station. He finished the rods and dials and had the seat turned and was lowering it back onto the assembly line. His left thumb became caught in the trolley, resulting in partial amputation through the phalanx.
An employee was running a CNC tube bender. The bending clamp came in to grab the tube, and the employee's left index finger became caught between the clamp and the tube while it was compressed. The employee's fingertip was amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Other motor vehicle seating and interior trim manufacturing employers in Kansas
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.