OSHA SearchOSHA records by employer

Sensidyne, LP: OSHA inspections and violations

Saint Petersburg, Florida · Other Measuring and Controlling Device Manufacturing · NAICS 334519

1inspections
4citation items
$6,844current penalties
May 12, 2017last inspection

OSHA inspectors have visited Sensidyne, LP in Florida one time.

It opened on May 12, 2017 as a planned inspection, in Saint Petersburg.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $11,406; today they stand at $6,844, 40% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Sensidyne, LP averages $6,844 across 1 cited inspection.

Sensidyne, LP: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Florida · latest 90 days of OSHA records

333employers cited

Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Florida

Checking a subcontractor, a client or your own company? Watch Sensidyne, LP and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342320678 OPENED MAY 12, 2017Closed

Planned · Partial · Safety · 92 employees at the site · Closed Jun 21, 2017

1000 112th Circle North Suite 100, Saint Petersburg, FL 33716 · Other Measuring and Controlling Device Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$3,802$2,281Jun 7, 2017Final
Citation 1, item 2
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
Serious$3,802$2,281Jun 7, 2017Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$3,802$2,281Jun 7, 2017Final
Citation 1, item 3b
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Jun 7, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(c)(4)(i)

(4) Projecting shaft ends. (i) Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves.

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other other measuring and controlling device manufacturing employers in Florida

Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.