OSHA records show Sephora USA, Inc. at 5 sites in 3 states. Together they've had 10 inspections and $5,500 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 5 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Nov 17, 2021: Employee injures foot when struck against post
At 10:50 a.m. on November 17, 2021, an employee was operating a Raymond lift truck inside a warehouse and was making a left turn from one aisle to another with his foot over the edge of the standing platform when his foot struck the corner rail post. The employee was hospitalized to treat two broken toes and possible nerve damage to his left foot.
No citations from this inspection.
Inspection 341225969 OPENED FEB 5, 2016Closed
Complaint · Partial · Safety · 350 employees at the site · Closed Feb 16, 2016
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Belcamp site logged 13 recordable injuries or illnesses among about 401 workers: 3.1 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 318 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
6768-67680052-Bedc
Belcamp · 2021
401
13
8
3.1
2.6
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.147(c)(6)(ii)
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.