OSHA SearchOSHA records by employer

Shannon Cabinets Inc: OSHA inspections and violations

Frazee, Minnesota · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

1inspections
6citation items
$1,875current penalties
Oct 8, 2015last inspection

OSHA inspectors have visited Shannon Cabinets Inc in Minnesota one time.

It opened on Oct 8, 2015 as a planned inspection, in Frazee.

In all, OSHA issued 6 citation items: 6 serious.

The penalties, $1,875 in total, stand where OSHA first set them.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Shannon Cabinets Inc averages $1,875 across 1 cited inspection.

Shannon Cabinets Inc: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Minnesota · latest 90 days of OSHA records

371employers cited

5 of them in the same industry

Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Minnesota

Checking a subcontractor, a client or your own company? Watch Shannon Cabinets Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341148674 OPENED OCT 8, 2015Closed

Planned · Complete · Safety · 5 employees at the site · Closed Jan 25, 2016

38696 Us Highway 10, Frazee, MN 56544 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.134(a)(2) · Respiratory protection
Serious$225$225Nov 23, 2015Final
Citation 1, item 2
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$450$450Nov 23, 2015Final
Citation 1, item 3
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$300$300Nov 23, 2015Final
Citation 1, item 4
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$450$450Nov 23, 2015Final
Citation 1, item 5
29 CFR 1910.242(b) · Hand and power tools
Serious$225$225Nov 23, 2015Final
Citation 1, item 6 Serious$225$225Nov 23, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(a)(2)

(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.242 · Hand and power tools

29 CFR 5205.720

Other wood kitchen cabinet and countertop manufacturing employers in Minnesota

Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.