OSHA has inspected Shultz Steel LLC 16 times in California since 1996.
The latest one began on Dec 23, 2024 after an accident, in South Gate.
Those inspections ended with 31 citation items: 8 serious and 23 other-than-serious.
Penalties were first proposed at $100,225 and now stand at $44,835, 55% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Shultz Steel LLC averages $10,918 (2 cited inspections).
1 inspection on this page followed a fatal incident.
Shultz Steel LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,117employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Oct 24, 2011: Employee struck by forklift
At approximately 3:10 a.m. on October 24, 2011 Employee #1 a maintenance mechani c of Shultz Steel Company suffered an open fracture and crushing injury to his l eft heel due to being struck by a forklift. At the time of the accident, Employe e #1 was performing a regularly assigned task of operating an overhead crane in the attempt to move a hearth hood from the hearth to a storage location. While E mployee #1 was moving the hearth hood his attention was focused on his task, he was moving along the south end of the hood on foot to ensure that the hood was o ver the locating posts. Simultaneously, another a coworker was operating a 35,00 0 pound capacity forklift in reverse, in the immediate area, moving a press die from the hearth. He observed the other employees working in the area to his left rear and sounded his forklift horn to alert them to his presence; in addition t he automatic forklift audible back-up alarm was operating at the time. The cowor ker began to back up while looking over his right shoulder in the direction of h is travel when he heard a scream from his left rear, he stopped, looked and obse rved that Employee #1 had moved from his previous location and was now lying on the floor screaming in pain, adjacent to the left rear wheel of the forklift. He immediately stopped his forklift to aid him. It was determined that the left re ar wheel had struck the left heel of Employee #1 resulting in a severe open frac ture and crushing injury requiring surgery and prolonged hospitalization.
No citations from this inspection.
Inspection 313385189 OPENED SEP 3, 2011Closed
Accident · Partial · Safety · 300 employees at the site · Closed Aug 1, 2014
Incident on Sep 3, 2011 (fatal): Employee suffers fatal fall
At approximately 6:00 am, on September 3, 2011 Employee #1, a lead maintenance m echanic suffered a fatal injury due to a fall. At the time of the accident, Empl oyee #1 was performing a sporadically assigned task of replacing the cylinder se als on a 40,000 ton press in the attempt to repair an oil leak. Employee #1 had handed tools to other employees from the pump room floor to the press platen. Em ployee #1 then climbed over a guard rail separating the pump room from a 15 foot , 11 inch fall via a 28 inch gap between the pump room and the press platen, and started to access the press platen via a portable fiberglass step ladder that w as placed horizontally across the gap and used as a gang-way. He fell 15 feet 11 inches into the press service pit and sustained multiple skull fractures. Emplo yee #1 was transported via ambulance to Saint Francis Medical Center where they attempted to revive him. Their efforts were not successful and he was pronounced dead. The investigation concluded that the Employee #1 was exposed to an unprot ected fall hazard of 15 feet 11 inches without guardrails or other fall protecti on.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3210 B
Serious
$18,000
$7,200
Nov 4, 2011
Final
Citation 2, item 1
29 CFR 3273 A
Other-than-serious
$7,200
$0
Nov 4, 2011
Final
Citation 3, item 1
29 CFR 3276 E16
Serious
$7,200
$7,200
Nov 4, 2011
Final
Inspection 313384323 OPENED MAY 6, 2011Closed
Unprogrammed related · Partial · Safety · 365 employees at the site · Closed Jun 20, 2012
Incident on Aug 29, 2007: Employee is injured when struck by air hose
On August 29, 2007, Employee #1, a maintenance mechanic, and a coworker had pump ed out the oil from a 28,000 TP pit and put it into 55-gallon drums in the basem ent. They used a Sandpiper pump with compressed air supplied through 0.75-in. ai r hoses. The air pressure from the main valve was 110 psi and the maximum pressu re of pump was 100 psi. At approximately midnight, they completed the job and we re cleaning up the area. The coworker was cleaning the air hose on the suction s ide of pump and Employee #1 was cleaning the air hoses on the supply side. This consisted of two air hoses in-line. Employee #1 first disconnected the air hose from the pump, cleaned and wrapped it. He then disconnected two air hoses withou t shutting down the air supply. As he released the quick disconnect one of the h oses slipped from his hand and struck his thigh. Employee #1 did not feel any pa in so he continued to clean the hose and finished his shift. He noticed a small mark on his right thigh. For next couple of days, the mark on his right thigh go t redder and longer and by Saturday night he was experiencing a fever. Employee #1 was hospitalized for 10 days for cellulites.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 2, item 1
29 CFR 3301 C
Serious
$18,000
$1,350
Nov 16, 2007
Final
Inspection 310489158 OPENED JUN 28, 2007Closed
Accident · Partial · Safety · 350 employees at the site · Closed Nov 30, 2007
Incident on May 31, 2002: Employee sustains amputations and broken finger when crushed
On May 31, 2002, Employee #1 and two coworkers, the nipper operator and an assis tant were assigned to remove the 1550-finish bottom die. At the time of the acci dent the tree-man crew was having difficulty picking up the die (they were unabl e to grasp it). They switched to a different location (form south to north) and attempted to lift the die from there, hoping to have a better grasp from the nor th side. In order to improve the coefficient of friction while the dies are hot, Kaowool, a thermal material is applied to the dies. While on the north side, Em ployee #1 and his assistant were applying the kaowool between the die and the ja w. The east side, where Employee #1 was located, appeared to have barely enough space to fit his hand between the die and the jaw. While Employee #1 was staffin g the kaowool between the die and the jaw, the operator, for an unknown reason, thought the die was moving towards the assistant. In a reflex movement, the oper ator activated the clam, causing the jaws to close crushing the Employee #1's le ft index, third and fourth fingers. The paramedics arrived shortly after the eme rgency call was made, and transported the victim to Saint Francis Medical Group where he was treated for his injuries. As a result of the accident, the extent o f the injuries was: Partial amputation of left index finger and multiple fractur es of third and fourth fingers. The equipment involved in the accident was the D ango & Dienenthal Nipper (a material handling equipment unit similar in function to a forklift equipped with a clamp instead of forks) and the 1550 finish botto m die. The employer is engaged in applications in aircraft, submarines, tanks, m issiles, space shuttle main engines, gas turbine engines, launch vehicles and in the International Space Station. Shultz Steel maintains a quality system that i s certified to ISO 9002 and AS 9100 requirements. The accident occurred at 5321 Firestone B., Southgate, CA, the site address for Shultz Steel Co., the victim's employer.
No citations from this inspection.
Inspection 126065002 OPENED JUL 13, 1999Closed
Accident · Partial · Safety · 340 employees at the site · Closed Sep 1, 2000
Incident on Apr 26, 1999: Employee injured when finger amputated by hydraulic press
On April 26, 1999, Employee #1 and coworkers were working on a 28,000-ton hydrau lic press. They were in the process of making a clamp removal prior to a die cha nge. One of the floor helpers on the north side of the press gave an "all clear" signal to the operator inside a booth to raise the ram. Employee #1 was in the process of completing the removal of a die clamp when his finger became caught b etween the die clamp and the bolster amputating the little finger of his right h and at the first knuckle.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314 B
Other-than-serious
$5,000
$300
Oct 18, 1999
Final
Inspection 126068154 OPENED MAR 2, 1999Closed
Accident · Partial · Safety · 355 employees at the site · Closed Jul 23, 1999
Incident on Jan 25, 1999: Employees hand fractured when caught under heavy load
At approximately 6:45 p.m. on January 25, 1999, Employee #1 was working in the h and grinder area of the conditioning department. He was setting up to grind a me tal part weighing approximately 420 pounds. He signaled the forklift operator to bring in a piece and the operator drove the part into the grinding booth toward s the bench and a 36-in. wooden pallet used as a stand. Employee #1 was holding the pallet up on its end with his left hand on top as the driver dropped the met al piece from its mast. Employee #1's hand was caught and his left middle and in dex finger were fractured and he received a contusion on his left hand. He was h ospitalized.
No citations from this inspection.
Inspection 126133487 OPENED SEP 24, 1998Closed
Accident · Complete · Safety · 375 employees at the site · Closed Apr 8, 2000
Incident on Aug 25, 1998: Employee suffers crushing injury
On August 25, 1998, Employee #1 was attempting to place a wooden spacer between two sets of contour rings. Each ring measured 61 in. inside diameter, 67 in. out side diameter, and 7 in. high and weighed three hundred and twenty five pounds. Two rings were banded together and stacked on two other sets of banded rings. A coworker used the extended fork of a fork truck to lift one side of the top set of contour rings. Employee #1 was attempting to place the wooden spacer between the top two sets of banded contour rings. The contour rings slipped off of the f ork and crushed Employee #1's left hand. Employee #1 sustained a serious injury to the first and second fingers of his left hand. Employee #1 was hospitalized f or three days.
Incident on May 22, 1998: Employee sustained injuries when struck by metal ring
At approximately 5:00 p.m. on May 22, 1998, Employee #1, a maintenance mechanic helper, was involved in an accident. Employee #1 was employed by the Shultz Stee l Company located in Southgate, CA. The accident happened in the forging departm ent when a titanium metal ring, weighing about 700 lb, cracked, came loose, and hit Employee #1 from the back at his left shoulder. As a result, Employee #1 was pushed forward with his face down, hitting the top of the cabinet in front of h im. Employee #1 was hospitalized. The doctors' report indicated that Employee #1 sustained laceration of the mid lower lip, soft tissue injury to the left poste rior/superior chest area, fracture to the left scapula, and fracture to the nasa l bone. After treatment and observation, Employee #1 was released from the hospi tal on May 25, 1998.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 14301 A02
Other-than-serious
$375
$375
Oct 15, 1998
Closed
Citation 1, item 2
29 CFR 3328 E
Other-than-serious
$375
$375
Oct 15, 1998
Closed
Inspection 119782266 OPENED APR 15, 1996Closed
Referral · Partial · Safety · 200 employees at the site · Closed Sep 13, 2010
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the South Gate site logged 2 recordable injuries or illnesses among about 327 workers: 0.6 per 100 full-time workers, against a median of 4.0 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Shultz Steel LLC
South Gate · 2025
327
2
0
0.6
4.0
Shultz Steel Co
South Gate · 2021
191
2
0
0.9
4.0
Included with any plan: 2 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.