Since 2003, OSHA inspectors have visited Sierra Forest Products in California 10 times.
The most recent inspection opened on Nov 19, 2024 after a fatality or catastrophe, in Terra Bella.
In all, OSHA issued 12 citation items: 5 serious and 7 other-than-serious.
The penalties, $56,015 in total, stand where OSHA first set them.
The rule cited most here is 2473.2 (), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Sierra Forest Products averages $9,504 across 4 cited inspections.
2 inspections on this page followed a fatal incident.
Sierra Forest Products also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,130employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Nov 18, 2024 (fatal): Employee dies from natural causes after losing consciousness
At 2:45 p.m. on November 18, 2024, an employee working as a maintenance worker for a lumber mill was performing routine maintenance greasing a set of bearings on a lumber edger. The employee was working from an elevated platform which he accessed through a series of catwalks associated with a large milling machine. The employee was working approximately 18 feet above grade when he began to feel ill. After the onset of symptoms the employee climbed a 4.5-foot fixed industrial stair where he sat and attempted to recover. Coworker #1 found the employee a short while later unresponsive. Coworker #1 notified Coworker #2 (supervisor) who in turn called for emergency medical services (EMS). Coworker #2 immediately traveled to the place were the employee was found and initiated CPR. The employee did not recover after losing of consciousness. According to the coroners report employee had died due to natural causes.
Incident on Apr 22, 2019: Employee fractures leg while pulling jammed log out of conve
At 8:15 a.m. on April 22, 2019, an employee was attempting to extract an 18 inch by 4 foot log that was stuck in a Trommel Screen conveyor by pulling on it. The log was wet and heavy but released easier than the employee expected causing him to lose his balance and fall backward onto an uneven surface. The employee incurred a compound fracture to his left leg and required hospitalization for surgery.
No citations from this inspection.
Inspection 342914819 OPENED JAN 30, 2018Closed
Accident · Partial · Safety · 150 employees at the site · Closed Feb 26, 2024
Incident on Dec 29, 2017: Employee's finger is partially amputated in wood planing mac
At 6:15 a.m. on December 29, 2017, an employee was operating a Coastal wood planing machine and was attempting to clear a piece of wood from the blade. The employee's hand came in contact with the running blades resulting in the partial amputation of a finger on their right hand.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314(C)
Serious
$18,000
$18,000
Jun 26, 2018
Final
Inspection 340210681 OPENED JAN 27, 2015Closed
Complaint · Partial · Safety · 120 employees at the site · Closed Apr 21, 2015
Incident on Aug 18, 2006 (fatal): Employee dies after being struck by forklift
At approximately 12:00 p.m. on August 18, 2006, Employee #1 and a group of cowor kers were walking to the parking lot from the yard area of a lumber manufacturer . Employee #1 was further into the roadway than the other employees. A coworker, driving a Taylor forklift, Model Number TE200S, came behind the employees. As t he employees approached a curved area, the forklift driver made a wide left turn to avoid them. He was looking to his left and did not see Employee #1 in front of him. The left arm of the forklift struck Employee #1 and knocked him to the g round, where he hit his head. He was transported by helicopter to Kern County Me dical Center where he died. The driver of the forklift stated that he was in sec ond gear and was traveling at approximately 8 to 10 mph.
No citations from this inspection.
2 older inspections
Inspection 125731109 OPENED AUG 18, 2005Closed
Accident · Partial · Safety · 160 employees at the site · Closed Mar 25, 2009
Incident on Mar 18, 2005: Employee finger amputated in planer
On March 18, 2005, Employee #1 was feeding 3-in. by 3-in. cedar boards into a co astal planer. One board became stuck in the planer rolls. Employee #1 turned off the rolls and tried to remove the stuck board with his hands. A supervisor told Employee #1 he was slowing down production and turned on the rollers and lowere d the top roller while Employee # 1's hands where still in the planer. The top r oller caught Employee #1's glove and pulled his hand in, crushing it. Employee # 1 was hospitalized with an amputated finger.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314 C
Serious
$18,000
$18,000
Sep 2, 2005
Closed
Inspection 300740073 OPENED MAY 12, 2003Closed
Programmed other · Partial · Health · 118 employees at the site · Closed Aug 7, 2003
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Terra Bella site logged 14 recordable injuries or illnesses among about 124 workers: 11.8 per 100 full-time workers, against a median of 4.2 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Sierra Forest Products
Terra Bella · 2021
124
14
0
11.8
4.2
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.