OSHA SearchOSHA records by employer

Silverio Jasso: OSHA inspections and violations

Dacula, Georgia · Masonry Contractors · NAICS 238140

1inspections
5citation items
$14,895current penalties
Dec 10, 2025last inspection

OSHA inspectors have visited Silverio Jasso in Georgia one time.

It opened on Dec 10, 2025 as a planned inspection, in Dacula and is still open.

In all, OSHA issued 5 citation items: 5 serious.

The penalties, $14,895 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Silverio Jasso averages $14,895 across 1 cited inspection.

Silverio Jasso: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

Want to know if OSHA cites Silverio Jasso again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348636788 OPENED DEC 10, 2025Open

Planned · Partial · Health · 2 employees at the site · Open

Lot #40, Dacula, GA 30019 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$2,837$2,837Dec 30, 2025Final
Citation 1, item 2
29 CFR 1926.300(b)(2) · Tools—Hand and Power: general requirements
 Serious$2,837$2,837Dec 30, 2025Final
Citation 1, item 3
29 CFR 1926.451(e)(1) · Scaffolds, general requirements
 Serious$2,837$2,837Dec 30, 2025Final
Citation 1, item 4
29 CFR 1926.451(g)(1)(vii) · Scaffolds, general requirements
 Serious$2,837$2,837Dec 30, 2025Final
Citation 1, item 5
29 CFR 1926.1153(c)(1) · Silica dust in construction
 Serious$3,547$3,547Dec 30, 2025Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1153 · Silica dust in construction

29 CFR 1926.1153(c)(1)

(c) Specified exposure control methods. (1) For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

29 CFR 1926.300(b)(2)

(2) Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating or moving parts of equipment shall be guarded if such parts are exposed to contact by employees or otherwise create a hazard. Guarding shall meet the requirements as set forth in American National Standards Institute, B15.1-1953 (R1958), Safety Code for Mechanical Power-Transmission Apparatus.

29 CFR 1926.451 · Scaffolds, general requirements

Other masonry contractors employers in Georgia

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.