Lubbock, Texas · Measuring, Dispensing, and Other Pumping Equipment Manufacturing · NAICS 333914
1inspections
2citation items
$6,455current penalties
Jun 21, 2023last inspection
OSHA has inspected Simflo, LLC once in Texas.
The inspection began on Jun 21, 2023 on a referral, in Lubbock.
That inspection ended with 2 citation items: 1 serious and 1 other-than-serious.
Penalties were first proposed at $10,759 and now stand at $6,455, 40% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Simflo, LLC averages $6,455 (1 cited inspection).
Simflo, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
29 CFR 1904.41(a)(2) · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
Other-than-serious
$1,537
$922
Oct 19, 2023
Final
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Lubbock site logged 1 recordable injury or illness among about 123 workers: 0.8 per 100 full-time workers, against a median of 1.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
SIMFLO Lubbock
Lubbock · 2025
123
1
0
0.8
1.9
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Jun 15, 2023, Lubbock: Hospitalization · fractures and other injuries, n.e.c. · shoulder(s), including clavicle(s), scapula(e)
An employee was checking the taped hole he created on a shaft and was pulling the tail stock back on the lathe. The employee leaned over the machine and the lead screw caught his shirt, pulling him into the machine. As it pulled tighter, he was forced toward the machine, impacting his right shoulder. The employee suffered multiple fractures and torn tendons to right shoulder.
Oct 28, 2021, Lubbock: Hospitalization · fractures · chest, except internal location of diseases or disorders
At about 3:00 p.m. on October 28, 2021, an employee was on a work platform, which had been raised by a forklift 8-10 feet off the floor so he could access the control box for an overhead door that had stopped working. A door on the platform swung open and the employee fell backward to the floor, landing on the back left side of his body. He suffered six broken ribs on the left side and was hospitalized.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
29 CFR 1904.41(a)(2)
(2) Annual electronic submission of information from OSHA Form 300 Log of Work-Related Injuries and Illnesses and OSHA Form 301 Injury and Illness Incident Report by establishments with 100 or more employees in designated industries. If your establishment had 100 or more employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix B to subpart E of this part, then you must electronically submit information from OSHA Forms 300 and 301 to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the forms.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other measuring, dispensing, and other pumping equipment manufacturing employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.
