Since 2009, OSHA inspectors have visited Six Flags Fiesta Texas in Texas 2 times.
The most recent inspection opened on May 31, 2017 on a referral, in San Antonio.
In all, OSHA issued 8 citation items: 8 other-than-serious.
The proposed penalties came to $53,728; today they stand at $31,310, 42% less.
The rule cited most here is 1910.335 (safeguards for personnel protection), 4 times.
Among arts and recreation employers, the typical cited inspection since 2015 ends with a $1,398 penalty. Six Flags Fiesta Texas averages $15,210 across 1 cited inspection.
Six Flags Fiesta Texas also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on May 28, 2017: Employee trips while performing maintenance on an amusement
At 8:45 a.m. on May 28, 2017, an employee was inspecting the cables of an amusement ride. The employee tripped and grabbed a moving cable. The employee's fingers were caught between the cable and a pulley. The employee sustained amputation of two fingers.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the San Antonio site logged 1 recordable injury or illness among about 9 workers: 20.6 per 100 full-time workers, against a median of 5.3 for its industry. Those cases cost 113 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Six Flags Fiesta Texas
San Antonio · 2024
9
1
1
20.6
5.3
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.
May 9, 2025, San Antonio: Hospitalization · fractures · upper arm(s)
An employee was throwing trash into a 2-yard trash container. The employee tripped on a trailer hitch attached to the container and was hospitalized with a closed fracture to their right humerus.
Feb 22, 2024, San Antonio: Hospitalization, amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
An employee was performing maintenance work on a rollercoaster. A handheld impact drill fell from a board onto the employee's hand, causing a lifted fingernail as well as a fingertip amputation.
Jan 19, 2023, San Antonio: Hospitalization · fractures · ankle(s)
An employee was gathering tools while landscaping near a creek. The employee jumped over the creek and landed awkwardly, fracturing their ankle. The employee was hospitalized and received surgery.
Oct 6, 2017, San Antonio: Hospitalization · fractures · hip(s)
An employee was standing on a stationary golf cart to empty a trash can into a dumpster when he fell about 2 feet to the asphalt ground, fracturing his hip and requiring hospitalization.
May 28, 2017, San Antonio: Amputation · amputations · finger(s), fingernail(s), n.e.c.
The employee was performing a daily ride inspection when his left hand was caught in a sheave, amputating his middle and ring fingers to the first knuckle. As he used his right hand to free himself, the sheave injured his right hand.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.219(e)(1)(i)
(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.