Morton Grove, Illinois · Metal Crown, Closure, and Other Metal Stamping (except Automotive) · NAICS 332119
5inspections
8citation items
$6,017current penalties
Mar 6, 2023last inspection
OSHA has inspected Sko-Die, Inc. 5 times in Illinois since 1975.
The latest one began on Mar 6, 2023 after a complaint, in Morton Grove.
Those inspections ended with 8 citation items: 1 serious and 7 other-than-serious.
Penalties were first proposed at $8,579 and now stand at $6,017, 30% lower after settlements or reviews.
Mechanical power presses comes up most often in these citations: 2 items under 1910.217.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Sko-Die, Inc. averages $5,977 (1 cited inspection).
Sko-Die, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
423employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Morton Grove site logged 4 recordable injuries or illnesses among about 60 workers: 6.1 per 100 full-time workers, against a median of 2.4 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Sko-Die
Morton Grove · 2025
60
4
0
6.1
2.4
Sko-Die, Inc.
Morton Grove · 2024
85
6
0
6.8
4.0
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(iv) Handling liquids at point of final use. (a) Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall be kept in covered containers when not actually in use.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.