Softek Contractual Services Inc: OSHA inspections and violations

29 CFR 1910.1200 · Hazard communication

29 CFR 1910.1200(e)(1)

(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:

29 CFR 1910.22 · Walking-working surfaces

29 CFR 1910.22(d)(2)

(2) Hazardous conditions on walking-working surfaces are corrected or repaired before an employee uses the walking-working surface again. If the correction or repair cannot be made immediately, the hazard must be guarded to prevent employees from using the walking-working surface until the hazard is corrected or repaired; and

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1910.28(b)(1)(i)

(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:

29 CFR 1910.305 · Electrical wiring methods

29 CFR 4080.1011

29 CFR 4081.123

29 CFR 4081.1875

29 CFR 4081.2015

29 CFR 4081.221

29 CFR 4081.4007

29 CFR 4081.454

29 CFR 4081.4921