Solaris Paper, Inc. has 11 OSHA inspections on record in California, the first in 2008.
OSHA's last visit started on Sep 2, 2022 after a fatality or catastrophe, in Moreno Valley.
Across those inspections OSHA issued 22 citation items: 11 serious and 11 other-than-serious.
OSHA proposed $209,180 in penalties. After settlements and reviews the total is $161,225, down 23%.
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Solaris Paper, Inc. averages $20,717 over 3 cited inspections in that time.
2 inspections on this page followed a fatal incident.
Solaris Paper, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,120employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Sep 2, 2022 (fatal): Employee is killed when caught in baler
At 6:40 a.m. on September 2, 2022, an employee was loading large sheets of corrugate into the loading chamber of a BALETECH Baler. The employee became caught in the baler and was killed.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314(L)(2)
Other-than-serious
$750
$750
Feb 27, 2023
Final
Citation 2, item 1
29 CFR 3314(G)
Serious
$22,500
$20,000
Feb 27, 2023
Final
Citation 3, item 1
29 CFR 4353(A)
Serious
$22,500
$22,500
Feb 27, 2023
Final
Citation 4, item 1
29 CFR 4355(A)(2)
Serious
$22,500
$0
Feb 27, 2023
Final
Inspection 345160956 OPENED FEB 9, 2021Closed
Fatality or catastrophe · Partial · Health · 150 employees at the site · Closed Mar 18, 2022
Incident on Dec 17, 2020 (fatal): Employee with covid-19 infection dies
An employee had worked as a Forklift Operator for a towel and tissue manufacturer. The work area has both assembly and distribution areas, where employees distribute products to retail and other markets. The employee's job was mainly to move boxes containing products in the distribution area. At 8:00 a.m. on December 17, 2020, the employee was hospitalized and died on the same day. While he was working, the employee was observed operating the forklift as he typically did each work shift. The employee didn't report any symptoms while at work according to coworkers. The employee last worked on December 4, 2020, was tested on December 9, 2020, and was reported positive for COVID-19 on December 11, 2020. The employee was hospitalized prior to his passing. The employer did not have an effective COVID-19 Prevention Program in place.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 2, item 1
29 CFR 3205(C)(3)(B)
Other-than-serious
$13,500
$600
Jun 30, 2021
Final
Inspection 343399705 OPENED AUG 17, 2018Open
Accident · Partial · Safety · 140 employees at the site · Open
Incident on Mar 7, 2013: Machine operator amputates one finger and fractures three
At approximately 3:15 p.m. on March 7, 2013, Employee #1 was working as a machin e operator for a firm that manufactured paper towels and tissue products. He had been with the company for approximately 3.5 years. On the day of the incident, Employee #1 started work around 2:00 p.m. He clocked in and went to a pre-shift meeting with his supervisor. He then went to operate the "F1 core machine." Imme diately, he started having problems with the machine, for it jammed twice. Emplo yee #1 knew that the machine's elevator sensor needed adjusting. This was a job that normally would have been reported to the maintenance mechanics. Employee #1 couldn't remember if he notified the mechanics, but he knew they were short-han ded that day. He needed to do something, because of production demands. He decid ed to adjust the sensors on the elevator in the machine. Employee #1 reached bel ow the guard on the F1 core elevator and was adjusting the sensor, when his righ t fingers got caught between a chain and a sprocket. He also injured his left ha nd trying to extricate his right hand. Employee #1 sustained an amputation on hi s left middle finger and three fractured fingers on his right hand. Employee #1' s supervisor was at the other end of the facility, when he received a call regar ding the incident. At approximately 7:50 p.m. on March 7, 2013, the employer rep orted the incident to the Cal/OSHA West Covina District office.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 4075 A
Serious
$18,000
$18,000
Sep 5, 2013
Final
Inspection 312668486 OPENED NOV 1, 2011Closed
Accident · Partial · Safety · 195 employees at the site · Closed Apr 22, 2014
Incident on Sep 13, 2011: Employee catches fingertip in conveyor and is amputated
At approximately 9:30 p.m. on September 13, 2011, Employee #1 was providing main tenance service in a facility, where paper towels and tissues were manufactured. She was tasked with servicing Furtura printers. After performing maintenance on the printers, Employee #1 provided service on the air hosing and lubrication of the diverter. The diverter included a conveyor. She did not power down the mach ine, but removed the chain and sprocket cover on the conveyor and lubricated its parts. While replacing the cover and positioning the conveyor's safety guard, h er index finger slid behind the guard. Her finger was pulled into the machine an d her fingertip was amputated between the chain and sprocket of the conveyor. Th e supervisor was notified. A coworker transported her to Health First Medical Gr oup, where she was diagnosed with a distal left index finger amputation. That sa me day, she was transported to Western Hand Center for hand surgery. Employee #1 was hospitalized after the surgical procedure for postoperative care. The accid ent investigation revealed that the employer did not ensure she was adequately t rained on hazardous energy control procedures, which included the servicing of i nternal parts of a conveyor.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 2
29 CFR 3314 J01
Other-than-serious
$1,060
$850
Mar 6, 2012
Final
Inspection 315524496 OPENED JUN 1, 2011Closed
Complaint · Partial · Safety · 50 employees at the site · Closed Jun 2, 2011
Incident on Sep 27, 2009: Employee is crushed while repairing converting machine
At approximately 7:30 a.m. on September 27, 2009, Employee #1, and two coworkers were performing repairs on a Futura 1 toilet paper converting machine in the pr oduction area of a facility. As Employee #1 and his coworkers were repairing the machine, the accumulator part unexpectedly moved and crushed Employee #1. Emplo yee #1 was taken to St. Francis Medical Center, where he was hospitalized and tr eated for nine fractured ribs, fractures to his neck in two places, and nerve da mage to his left arm. The accident investigation revealed that despite the safet y interlocked door being in the open and deenergized mode, a bypass key allowed the machine to be energized. However, it was noted that Employee # 1 and his cow orkers failed to perform the lockout/tagout procedures that included pressing th e emergency stop/off button, shutting off and locking out the electrical energy source, and shutting off and locking out the pneumatic energy source.
Incident on Jul 23, 2009: Employee's finger is lacerated unjamming machine
At approximately 6:00 a.m. on July 23, 2009, Employee #1, a machine operator, wa s running a 702 G-Perini machine when the log ejector jammed. He tried to unjam it by pulling it with his right hand. The machine cycled, and his finger was cau ght in the ejector and a chuck on the machine. He was hospitalized with abrasion s on his finger.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314 C
Serious
$9,000
$9,000
Jan 21, 2010
Final
3 older inspections
Inspection 312661408 OPENED JUL 14, 2009Closed
Accident · Partial · Safety · 120 employees at the site · Closed Dec 30, 2010
Incident on Jun 27, 2009: Worker lacerates finger in paper manufacturing machine
At about 3:00 p.m. on June 27, 2009, Employee #1, a machine operator, was unjamm ing a tissue paper log, 9 ft long and 10 in. in diameter, from a FUTURA #2 machi ne in a production area of a manufacturer of tissue papers and towels in Santa F e Springs, CA. A diverter metal plate fell and closed down on his right hand, la cerating his right index finger. Employee #1 had been employed about six months as a machine operator before the accident. Investigations revealed that the dive rter metal plate in the FUTURA #2 machine was not blocked against inadvertent mo vement during clearing/unjamming work, as required by regulation.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314 C
Serious
$9,000
$9,000
Dec 17, 2009
Final
Inspection 312660988 OPENED MAY 26, 2009Closed
Accident · Partial · Safety · 115 employees at the site · Closed Sep 4, 2010
Incident on May 22, 2009: Employee's arm is lacerated by chain-sprocket drive
At approximately 11:30 p.m. on May 22, 2009, Employee #1, a machine operator of two weeks, was standing on a ladder, 7.5 feet above the floor, trying to remove a jammed tissue core from the chain conveyor unit of a Futura, Number 2 machine. The unit started and caught his right arm in the chain-sprocket drive, causing a deep laceration. He was hospitalized for his injuries. Employee #1 stated that he was not aware of the location of the control switch and had not been trained in Lockout/tagout safety rules.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 342 A
Other-than-serious
$5,000
$4,100
Nov 18, 2009
Final
Citation 1, item 2
29 CFR 3314 G02
Other-than-serious
$750
$0
Nov 18, 2009
Final
Citation 2, item 1
29 CFR 3314 C
Serious
$18,000
$18,000
Nov 18, 2009
Final
Inspection 312660087 OPENED DEC 30, 2008Closed
Complaint · Partial · Safety · 105 employees at the site · Closed Dec 30, 2009
Incident on Mar 6, 2009: Worker's fingers lacerated in rewinder machine
At approximately 8:00 p.m. on March 6, 2009, Employee #1 was working on a rewind er machine in a production area of a tissue paper plant. Employee #1 and a cowor ker, Employee #2, were standing about six feet apart and working together from o pposite sides of rolls of the rewinder to web paper through an embosser. Employe e #2 pressed the jog button on the machine, causing the pressure roll to move ag ainst the steel roll. Employee #1's right hand became trapped between the rolls, causing lacerations to his fingers. Employee #1 was transported to the hospital for treatment and was released the same day. Investigation of the incident reve aled that two employees were not in clear view of each other the entire time the y were working on opposite sides of rolls; and oral signals could not clearly be heard at times, due to machinery noise in production room. Both are requirement s for safe, two-person operation of the rewinder equipment.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 3
29 CFR 3314 G02
Other-than-serious
$750
$750
Jun 3, 2009
Closed
Citation 2, item 1
29 CFR 3203 A06
Serious
$3,375
$3,375
Jun 3, 2009
Closed
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Moreno Valley site logged 10 recordable injuries or illnesses among about 168 workers: 5.0 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 195 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Solaris Paper, Inc
Moreno Valley · 2025
168
10
2
5.0
2.1
Included with any plan: 1 more yearly log from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.