OSHA SearchOSHA records by employer

Sonoco (SPG) Incorporated: OSHA inspections and violations

Wausau, Wisconsin · Paper (except Newsprint) Mills · NAICS 322121

2inspections
5citation items
$8,790current penalties
Jun 9, 2021last inspection

OSHA has inspected Sonoco (SPG) Incorporated 2 times in Wisconsin since 2000.

The latest one began on Jun 9, 2021 on a referral, in Menasha.

Those inspections ended with 5 citation items: 5 serious.

Penalties were first proposed at $9,340 and now stand at $8,790, 6% lower after settlements or reviews.

Belts, pulleys and power-transmission parts comes up most often in these citations: 2 items under 1910.219.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Sonoco (SPG) Incorporated averages $8,290 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Sonoco (SPG) Incorporated: OSHA citation items per year, 2000 to 2021
Citation items per year, by inspection date.

Wisconsin · latest 90 days of OSHA records

229employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wisconsin

Checking a subcontractor, a client or your own company? Watch Sonoco (SPG) Incorporated and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345351639 OPENED JUN 9, 2021Closed

Referral · Partial · Safety · 120 employees at the site · Closed Oct 29, 2021

69 Washington St., Menasha, WI 54952 · Paper (except Newsprint) Mills · OSHA's record · Phone and website on Google Maps

Incident on May 16, 2021: Employee degloves finger when removing nozzle in unguarded r

At 2:00 p.m. on May 16, 2021, an employee working as a machine operator for a paper mill was preparing to remove a deckle nozzle from the #1 Paper Machine. The deckle nozzle is part of a spray system that creates a crisp edge on the product being formed. The machine had a sheet break due to blowing. While coworkers on the the dry end crew were cleaning up the paper and putting a rope on, the employee went to the back side of Vat #9 to change the nozzle. The crew slowed the machine down to thread speed (about 250 feet per minute) to allow the felt to continue to rotate around the equipment. The deckle nozzle is located just above the 42-inch by 145-inch MULTIPLI Wet/Dry Counterflow Skip Decked Cylinder Vat, which is equipped with Ultra Plane II Inlets, Dry Vat beam assemblies, and rectifier boards and which contains a water/chemical system which was about 120 degrees Fahrenheit. The employee was wearing green insulated rubber gloves to unscrew the deckle nozzle. Once the employee had removed the nozzle, he almost dropped it and reacted to grab it, at which point he caught his glove on a cylinder. The cylinder had small perforated holes and the employee felt a nip as his right hand was pulled towards the couch nip roller system. The employee pulled his hand free and went to the nearest coworker for assistance before being taken to the emergency room. The employee received medical treatment without hospitalization for a degloved thumb requiring surgery and small fractures to the ring and middle fingertips.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(ii) · Lockout/tagout
Serious$8,290$8,290Sep 2, 2021Final
Citation 1, item 1b
29 CFR 1910.147(d) · Lockout/tagout
Serious$0$0Sep 2, 2021Final

Inspection 300488863 OPENED SEP 28, 2000Closed

Complaint · Partial · Safety · 50 employees at the site · Closed Dec 8, 2000

840 S. 66th Ave., Wausau, WI 54401 · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$525$300Oct 5, 2000Closed
Citation 1, item 2a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$525$200Oct 5, 2000Closed
Citation 1, item 2b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Oct 5, 2000Closed

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Nov 11, 2021, Menasha: Hospitalization · fractures · hip(s)

An employee was inspecting paper for defects while standing on the end of a roll of paper in a machine. The machine was jogged and pulled the paper out from under the employee's feet. The employee fell to the floor, suffering a possible hip fracture.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(ii)

(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other paper (except newsprint) mills employers in Wisconsin

Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.