Spartan Cargo Trailers LLC has 2 OSHA inspections on record in Georgia, the first in 2019.
OSHA's last visit started on Feb 9, 2022 on a referral, in Alma.
Across those inspections OSHA issued 6 citation items: 4 serious and 2 other-than-serious.
OSHA proposed $27,800 in penalties. After settlements and reviews the total is $18,636, down 33%.
Most often, OSHA cited 1910.219, belts, pulleys and power-transmission parts (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Spartan Cargo Trailers LLC averages $9,318 over 2 cited inspections in that time.
Spartan Cargo Trailers LLC also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Georgia · latest 90 days of OSHA records
148employers cited
Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Spartan Cargo Trailers LLC and get notified the morning OSHA posts a new citation for it.
Incident on Feb 7, 2022: Employee amputates fingertip while using table saw
At 2:30 p.m. on February 7, 2022, an employee was operating a table saw to cut 3 inch wide strips from an 8 foot long piece of plywood. While attempting to remove a strip of plywood that had just been cut, the employee reach by the unguarded rear of the saw blade. The employee's fingers on his left hand were struck by the rotating saw blade, amputating his middle finger at the distal joint and causing lacerations to two other fingers. The employee was treated without hospitalization.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Alma site logged 8 recordable injuries or illnesses among about 135 workers: 6.2 per 100 full-time workers, against a median of 5.2 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Plant
Alma · 2025
135
8
0
6.2
5.2
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
Mar 22, 2022, Alma: Hospitalization · internal injuries to organs and blood vessels of the trunk · chest, except internal location of diseases or disorders
Employees were moving a trailer frame. The frame's front and back had been raised with dollies. Four employees were in the back, pushing the trailer forward, when the back end of the trailer came in contact with a piece of angle iron steel in the floor and the dolly came to an abrupt stop. The weight of the trailer overcame the dolly and an employee was pinned between the dolly and the back…
An employee was cutting wood on a table saw when their left middle finger contacted the blade, resulting in an amputation at the first joint.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(h)(1)
(h) Payment for protective equipment. (1) Except as provided by paragraphs (h)(2) through (h)(6) of this section, the protective equipment, including personal protective equipment (PPE), used to comply with this part, shall be provided by the employer at no cost to employees.
29 CFR 1910.132(h)(5)
(5) The employer must pay for replacement PPE, except when the employee has lost or intentionally damaged the PPE.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.