OSHA SearchOSHA records by employer

Stigler Printing: OSHA inspections and violations

Stigler, Oklahoma · Printing · NAICS 323119

1inspections
3citation items
$6,734current penalties
Jun 22, 2016last inspection

OSHA has inspected Stigler Printing once in Oklahoma.

The inspection began on Jun 22, 2016 as a planned inspection, in Stigler.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $11,223 and now stand at $6,734, 40% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Stigler Printing averages $6,734 (1 cited inspection).

Stigler Printing: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Oklahoma · latest 90 days of OSHA records

58employers cited

Get notified the morning OSHA posts each new citation in Oklahoma: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Oklahoma

Checking a subcontractor, a client or your own company? Watch Stigler Printing and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341571222 OPENED JUN 22, 2016Closed

Planned · Partial · Safety · 40 employees at the site · Closed Dec 27, 2016

204 S. Broadway St., Stigler, OK 74462 · Printing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$3,741$2,245Dec 15, 2016Final
Citation 1, item 2
29 CFR 1910.179(j)(3) · Overhead and gantry cranes
 Serious$3,741$2,245Dec 15, 2016Final
Citation 1, item 3
29 CFR 1910.242(b) · Hand and power tools
 Serious$3,741$2,245Dec 15, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.179(j)(3)

(3) Periodic inspection. Complete inspections of the crane shall be performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section, depending upon its activity, severity of service, and environment, or as specifically indicated below. These inspections shall include the requirements of paragraph (j)(2) of this section and in addition, the following items. Any deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard:

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.242(b)

(b) Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.

Other printing employers in Oklahoma

Alert subscribers get notified of each newly cited employer in Oklahoma the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.