Studco Building Systems US LLC: OSHA inspections and violations
Webster, New York · Other Building Material Dealers · NAICS 444190
2inspections
8citation items
$21,000current penalties
Aug 5, 2026last inspection
OSHA has inspected Studco Building Systems US LLC 2 times in New York since 2017.
The latest one began on Aug 5, 2026 on a referral, in Webster; the case is still open.
Those inspections ended with 8 citation items: 7 serious and 1 other-than-serious.
Penalties were first proposed at $38,098 and now stand at $21,000, 45% lower after settlements or reviews.
Training requirements comes up most often in these citations: 2 items under 1910.30.
How that compares: the median penalty per cited inspection for retail employers since 2015 is $1,750, and Studco Building Systems US LLC averages $10,500 (2 cited inspections).
Studco Building Systems US LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
353employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Studco Building Systems US LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Webster site logged 8 recordable injuries or illnesses among about 72 workers: 10.7 per 100 full-time workers, against a median of 0.6 for its industry. Those cases cost 23 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Studco Building Systems US LLC
Webster · 2022
72
8
3
10.7
0.6
Studco Building Systems
Webster · 2020
62
8
1
12.4
0.6
Included with any plan: 5 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was repairing a hole punching assembly. He used a small machinist hammer to free the boost cylinder, then lubricated the shaft and tested the cylinder. As he was retrieving the machinist hammer at the base of the punch, the roll forming machine activated and the punch struck his right ring finger. He suffered a fingertip amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Use of mechanical equipment. Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.
29 CFR 1910.176(b)
(b) Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.